From 206df69502da8bc2994d02be0b778e1ed0ed6743 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Tomislav=20Kopi=C4=87?= <tomislav@kopic.hr>
Date: Thu, 31 Oct 2024 20:01:15 +0100
Subject: [PATCH] Upgrade to new drivers

---
 Marlin/Configuration.h     |  8 ++++----
 Marlin/Configuration_adv.h | 14 +++++++-------
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 0e37c95..6df3a66 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -159,9 +159,9 @@
  *          TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
  * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
  */
-#define X_DRIVER_TYPE  TMC2100
-#define Y_DRIVER_TYPE  TMC2100
-#define Z_DRIVER_TYPE  TMC2100
+#define X_DRIVER_TYPE  TMC2209
+#define Y_DRIVER_TYPE  TMC2209
+#define Z_DRIVER_TYPE  TMC2209
 //#define X2_DRIVER_TYPE A4988
 //#define Y2_DRIVER_TYPE A4988
 //#define Z2_DRIVER_TYPE A4988
@@ -173,7 +173,7 @@
 //#define U_DRIVER_TYPE  A4988
 //#define V_DRIVER_TYPE  A4988
 //#define W_DRIVER_TYPE  A4988
-#define E0_DRIVER_TYPE TMC2100
+#define E0_DRIVER_TYPE TMC2209
 //#define E1_DRIVER_TYPE A4988
 //#define E2_DRIVER_TYPE A4988
 //#define E3_DRIVER_TYPE A4988
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 5280a4f..f55c2ad 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -2401,7 +2401,7 @@
 
 // The ASCII buffer for serial input
 #define MAX_CMD_SIZE 128
-#define BUFSIZE 16
+#define BUFSIZE 32
 
 // Transmission to Host Buffer Size
 // To save 386 bytes of flash (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
@@ -2410,18 +2410,18 @@
 // For debug-echo: 128 bytes for the optimal speed.
 // Other output doesn't need to be that speedy.
 // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
-#define TX_BUFFER_SIZE 0
+#define TX_BUFFER_SIZE 4
 
 // Host Receive Buffer Size
 // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
 // To use flow control, set this buffer size to at least 1024 bytes.
 // :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
-//#define RX_BUFFER_SIZE 1024
+#define RX_BUFFER_SIZE 2048
 
 #if RX_BUFFER_SIZE >= 1024
   // Enable to have the controller send XON/XOFF control characters to
   // the host to signal the RX buffer is becoming full.
-  //#define SERIAL_XON_XOFF
+  #define SERIAL_XON_XOFF
 #endif
 
 #if ENABLED(SDSUPPORT)
@@ -2438,7 +2438,7 @@
 // Dump an error to the serial port if the serial receive buffer overflows.
 // If you see these errors, increase the RX_BUFFER_SIZE value.
 // Not supported on all platforms.
-//#define RX_BUFFER_MONITOR
+#define RX_BUFFER_MONITOR
 
 /**
  * Emergency Command Parser
@@ -2448,7 +2448,7 @@
  * Currently handles M108, M112, M410, M876
  * NOTE: Not yet implemented for all platforms.
  */
-//#define EMERGENCY_PARSER
+#define EMERGENCY_PARSER
 
 /**
  * Realtime Reporting (requires EMERGENCY_PARSER)
@@ -3875,7 +3875,7 @@
  *
  * Implement M486 to allow Marlin to skip objects
  */
-#define CANCEL_OBJECTS
+//#define CANCEL_OBJECTS
 #if ENABLED(CANCEL_OBJECTS)
   #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message
 #endif