Initial commit

buildroot/share/PlatformIO/variants/MARLIN_ARTILLERY_RUBY/variant.h

@@ -0,0 +1,149 @@
+/*
+  Copyright (c) 2011 Arduino.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_ARDUINO_STM32_
+#define _VARIANT_ARDUINO_STM32_
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+/*----------------------------------------------------------------------------
+ *        Pins
+ *----------------------------------------------------------------------------*/
+
+
+#define PA0   0  //D0
+#define PA1   1  //D1
+#define PA2   2  //D2
+#define PA3   3  //D3
+#define PA4   4  //D4
+#define PA5   5  //D5
+#define PA6   6  //D6
+#define PA7   7  //D7
+#define PA8   8  //D8
+#define PA9   9  //D9
+#define PA10  10 //D10
+#define PA11  11 //D11
+#define PA12  12 //D12
+#define PA13  13 //D13
+#define PA14  14 //D14
+#define PA15  15 //D15
+#define PB0   16 //D16
+#define PB1   17 //D17
+#define PB2   18 //D18
+#define PB3   19 //D19
+#define PB4   20 //D20
+#define PB5   21 //D21
+#define PB6   22 //D22
+#define PB7   23 //D23
+#define PB8   24 //D24
+#define PB9   25 //D25
+#define PB10  26 //D26
+#define PB12  27 //D27
+#define PB13  28 //D28
+#define PB14  29 //D29
+#define PB15  30 //D30
+#define PC0   31 //D31
+#define PC1   32 //D32
+#define PC2   33 //D33
+#define PC3   34 //D34
+#define PC4   35 //D35
+#define PC5   36 //D36
+#define PC6   37 //D37
+#define PC7   38 //D38
+#define PC8   39 //D39
+#define PC9   40 //D40
+#define PC10  41 //D41
+#define PC11  42 //D42
+#define PC12  43 //D43
+#define PC13  44 //D44
+#define PC14  45 //D45
+#define PC15  46 //D46
+#define PD2   47 //D47
+#define PH0   48 //D48
+#define PH1   49 //D49
+
+// This must be a literal
+#define NUM_DIGITAL_PINS        66
+// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
+#define NUM_ANALOG_INPUTS       16
+#define NUM_ANALOG_FIRST        50
+
+/*
+// PWM resolution
+#define PWM_RESOLUTION          8
+#define PWM_FREQUENCY           20000 // >= 20 Khz => inaudible noise for fans
+#define PWM_MAX_DUTY_CYCLE      255
+*/
+
+// SPI Definitions
+#define PIN_SPI_MOSI            PC12
+#define PIN_SPI_MISO            PC11
+#define PIN_SPI_SCK             PC10
+#define PIN_SPI_SS              PA15
+
+// Timer Definitions
+// TIM1  - Hardware PWM (HB)
+// TIM2  - TIMER_SERVO
+// TIM3  - Hardware PWM (FAN0/1/2, HE0)
+// TIM4  - Hardware PWM (LED_R/G/B)
+// TIM5  - TIMER_TONE
+// TIM9  - STEP_TIMER
+// TIM10 - TEMP_TIMER
+// TIM11 -
+#define TIMER_SERVO             TIM2  // TIMER_SERVO must be defined in this file
+#define TIMER_TONE              TIM5  // TIMER_TONE must be defined in this file
+
+// UART Definitions
+#define SERIAL_UART_INSTANCE    1
+
+// Default pin used for 'Serial' instance (ex: ST-Link)
+// Mandatory for Firmata
+#define PIN_SERIAL_RX           PA10
+#define PIN_SERIAL_TX           PA9
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+//                            pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR     Serial
+#define SERIAL_PORT_HARDWARE    Serial
+#endif
+
+#endif /* _VARIANT_ARDUINO_STM32_ */