Initial commit

buildroot/share/PlatformIO/variants/MARLIN_F407ZE/variant.h

@@ -0,0 +1,216 @@
+/*
+  Copyright (c) 2011 Arduino.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_ARDUINO_STM32_
+#define _VARIANT_ARDUINO_STM32_
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+/*----------------------------------------------------------------------------
+ *        Pins
+ *----------------------------------------------------------------------------*/
+
+#define PA0    0
+#define PA1    1
+#define PA2    2
+#define PA3    3
+#define PA4    4
+#define PA5    5
+#define PA6    6
+#define PA7    7
+#define PA8    8
+#define PA9    9
+#define PA10  10
+#define PA11  11
+#define PA12  12
+#define PA13  13
+#define PA14  14
+#define PA15  15
+#define PB0   16
+#define PB1   17
+#define PB2   18
+#define PB3   19
+#define PB4   20
+#define PB5   21
+#define PB6   22
+#define PB7   23
+#define PB8   24
+#define PB9   25
+#define PB10  26
+#define PB11  27
+#define PB12  28
+#define PB13  29
+#define PB14  30
+#define PB15  31
+#define PC0   32
+#define PC1   33
+#define PC2   34
+#define PC3   35
+#define PC4   36
+#define PC5   37
+#define PC6   38
+#define PC7   39
+#define PC8   40
+#define PC9   41
+#define PC10  42
+#define PC11  43
+#define PC12  44
+#define PC13  45
+#define PC14  46
+#define PC15  47
+#define PD0   48
+#define PD1   49
+#define PD2   50
+#define PD3   51
+#define PD4   52
+#define PD5   53
+#define PD6   54
+#define PD7   55
+#define PD8   56
+#define PD9   57
+#define PD10  58
+#define PD11  59
+#define PD12  60
+#define PD13  61
+#define PD14  62
+#define PD15  63
+#define PE0   64
+#define PE1   65
+#define PE2   66
+#define PE3   67
+#define PE4   68
+#define PE5   69
+#define PE6   70
+#define PE7   71
+#define PE8   72
+#define PE9   73
+#define PE10  74
+#define PE11  75
+#define PE12  76
+#define PE13  77
+#define PE14  78
+#define PE15  79
+#define PF0   80
+#define PF1   81
+#define PF2   82
+#define PF3   83
+#define PF4   84
+#define PF5   85
+#define PF6   86
+#define PF7   87
+#define PF8   88
+#define PF9   89
+#define PF10  90
+#define PF11  91
+#define PF12  92
+#define PF13  93
+#define PF14  94
+#define PF15  95
+#define PG0   96
+#define PG1   97
+#define PG2   98
+#define PG3   99
+#define PG4  100
+#define PG5  101
+#define PG6  102
+#define PG7  103
+#define PG8  104
+#define PG9  105
+#define PG10 106
+#define PG11 107
+#define PG12 108
+#define PG13 109
+#define PG14 110
+#define PG15 111
+
+// This must be a literal with the same value as PEND
+#define NUM_DIGITAL_PINS        112
+// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
+#define NUM_ANALOG_INPUTS       13
+#define NUM_ANALOG_FIRST        NUM_DIGITAL_PINS
+
+//#define ADC_RESOLUTION          12
+
+// PWM resolution
+//#define PWM_RESOLUTION          12
+#define PWM_FREQUENCY           1000 // >= 20 Khz => inaudible noise for fans
+#define PWM_MAX_DUTY_CYCLE      255
+
+// SPI Definitions
+#define PIN_SPI_SS              PA4
+#define PIN_SPI_MOSI            PA7
+#define PIN_SPI_MISO            PA6
+#define PIN_SPI_SCK             PA5
+
+// I2C Definitions
+#define PIN_WIRE_SDA            PB9
+#define PIN_WIRE_SCL            PB8
+
+// Timer Definitions
+// Do not use timer used by PWM pin. See PinMap_PWM.
+#define TIMER_TONE              TIM6  // TIMER_TONE must be defined in this file
+#define TIMER_SERVO             TIM5  // TIMER_SERVO must be defined in this file
+#define TIMER_SERIAL            TIM7  // TIMER_SERIAL must be defined in this file
+
+// UART Definitions
+//#define SERIAL_UART_INSTANCE    1 // Connected to EXP3 header
+/* Enable Serial 3 */
+#define HAVE_HWSERIAL1
+#define HAVE_HWSERIAL3
+
+// Default pin used for 'Serial' instance (ex: ST-Link)
+// Mandatory for Firmata
+#define PIN_SERIAL_RX           PA10
+#define PIN_SERIAL_TX           PA9
+
+/* HAL configuration */
+#define HSE_VALUE               8000000U
+
+#define FLASH_PAGE_SIZE         (4U * 1024U)
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+//                            pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR     Serial
+#define SERIAL_PORT_HARDWARE_OPEN  Serial
+#endif
+
+#endif /* _VARIANT_ARDUINO_STM32_ */