Initial commit

buildroot/tests/.gitattributes

@@ -0,0 +1 @@
+* text=auto eol=lf

buildroot/tests/ARMED

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F1 ARMED
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+use_example_configs ArmEd
+opt_set X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2208
+opt_enable LASER_SYNCHRONOUS_M106_M107
+exec_test $1 $2 "ArmEd Example Configuration with mixed TMC Drivers" "$3"
+
+# clean up
+restore_configs

buildroot/tests/BIGTREE_BTT002

@@ -0,0 +1,26 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F407VGT6 BigTreeTech BTT002 V1.0
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_BTT002_V1_0 \
+        SERIAL_PORT 1 \
+        X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2130
+opt_enable SENSORLESS_HOMING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY SPI_ENDSTOPS
+exec_test $1 $2 "BigTreeTech BTT002 Default Configuration plus TMC steppers" "$3"
+
+#
+# A test with Probe Temperature Compensation enabled
+#
+use_example_configs Prusa/MK3S-BigTreeTech-BTT002
+exec_test $1 $2 "BigTreeTech BTT002 with Prusa MK3S and related options" "$3"
+
+# clean up
+restore_configs

buildroot/tests/BIGTREE_GTR_V1_0

@@ -0,0 +1,49 @@
+#!/usr/bin/env bash
+#
+# Build tests for BigTreeTech GTR 1.0
+#
+
+# exit on first failure
+set -e
+
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT -1 \
+        EXTRUDERS 8 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 TEMP_SENSOR_5 1 TEMP_SENSOR_6 1 TEMP_SENSOR_7 1
+# Not necessary to enable auto-fan for all extruders to hit problematic code paths
+opt_set E0_AUTO_FAN_PIN PC10 E1_AUTO_FAN_PIN PC11 E2_AUTO_FAN_PIN PC12 NEOPIXEL_PIN PF13 \
+        X_DRIVER_TYPE TMC2208 Y_DRIVER_TYPE TMC2130 \
+        NUM_RUNOUT_SENSORS 8 FIL_RUNOUT_PIN 3 FIL_RUNOUT2_PIN 4 FIL_RUNOUT3_PIN 5 FIL_RUNOUT4_PIN 6 FIL_RUNOUT5_PIN 7 \
+        FIL_RUNOUT6_PIN 8 FIL_RUNOUT7_PIN 9 FIL_RUNOUT8_PIN 10 FIL_RUNOUT4_STATE HIGH FIL_RUNOUT8_STATE HIGH \
+        FILAMENT_RUNOUT_SCRIPT '"M600 T%c"'
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH NEOPIXEL_LED Z_SAFE_HOMING NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE \
+           FILAMENT_RUNOUT_SENSOR FIL_RUNOUT4_PULLUP FIL_RUNOUT8_PULLUP FILAMENT_CHANGE_RESUME_ON_INSERT PAUSE_REHEAT_FAST_RESUME \
+           LCD_BED_TRAMMING BED_TRAMMING_USE_PROBE
+exec_test $1 $2 "BigTreeTech GTR | 8 Extruders | Auto-Fan | Mixed TMC Drivers | Runout Sensors w/ distinct states" "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT -1 \
+        EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 \
+        Z_DRIVER_TYPE A4988 Z2_DRIVER_TYPE A4988 Z3_DRIVER_TYPE A4988 Z4_DRIVER_TYPE A4988 \
+        DEFAULT_Kp_LIST '{ 22.2, 20.0, 21.0, 19.0, 18.0 }' DEFAULT_Ki_LIST '{ 1.08 }' DEFAULT_Kd_LIST '{ 114.0, 112.0, 110.0, 108.0 }'
+opt_enable TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_MIGRATION_FEATURE TOOLCHANGE_FS_SLOW_FIRST_PRIME TOOLCHANGE_FS_PRIME_FIRST_USED \
+           REPRAP_DISCOUNT_SMART_CONTROLLER PID_PARAMS_PER_HOTEND Z_MULTI_ENDSTOPS
+exec_test $1 $2 "BigTreeTech GTR | 6 Extruders | Quad Z + Endstops" "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT -1 \
+        EXTRUDERS 3 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 \
+        SERVO1_PIN PE9 SERVO2_PIN PE11 \
+        SERVO_DELAY '{ 300, 300, 300 }' \
+        SWITCHING_TOOLHEAD_X_POS '{ 215, 0 ,0 }' \
+        MPC_HEATER_POWER '{ 40.0f, 40.0f, 40.0f }' \
+        MPC_BLOCK_HEAT_CAPACITY '{ 16.7f, 16.7f, 16.7f }' \
+        MPC_SENSOR_RESPONSIVENESS '{ 0.22f, 0.22f, 0.22f }' \
+        MPC_AMBIENT_XFER_COEFF '{ 0.068f, 0.068f, 0.068f }' \
+        MPC_AMBIENT_XFER_COEFF_FAN255 '{ 0.097f, 0.097f, 0.097f }' \
+        FILAMENT_HEAT_CAPACITY_PERMM '{ 5.6e-3f, 3.6e-3f, 5.6e-3f }'
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SWITCHING_TOOLHEAD TOOL_SENSOR MPCTEMP MPC_EDIT_MENU MPC_AUTOTUNE_MENU
+opt_disable PIDTEMP
+exec_test $1 $2 "BigTreeTech GTR | MPC | Switching Toolhead | Tool Sensors" "$3"
+
+# clean up
+restore_configs

buildroot/tests/BIGTREE_GTR_V1_0_usb_flash_drive

@@ -0,0 +1,24 @@
+#!/usr/bin/env bash
+#
+# Build tests for BigTreeTech GTR 1.0
+#
+
+# exit on first failure
+set -e
+
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT 3 \
+        EXTRUDERS 8 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 TEMP_SENSOR_5 1 TEMP_SENSOR_6 1 TEMP_SENSOR_7 1
+opt_enable SDSUPPORT USB_FLASH_DRIVE_SUPPORT USE_OTG_USB_HOST \
+           REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH LCD_BED_TRAMMING BED_TRAMMING_USE_PROBE \
+           NEOPIXEL_LED Z_SAFE_HOMING FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE
+# Not necessary to enable auto-fan for all extruders to hit problematic code paths
+opt_set E0_AUTO_FAN_PIN PC10 E1_AUTO_FAN_PIN PC11 E2_AUTO_FAN_PIN PC12 NEOPIXEL_PIN PF13 \
+        X_DRIVER_TYPE TMC2208 Y_DRIVER_TYPE TMC2130 \
+        FIL_RUNOUT_PIN 3 FIL_RUNOUT2_PIN 4 FIL_RUNOUT3_PIN 5 FIL_RUNOUT4_PIN 6 FIL_RUNOUT5_PIN 7 FIL_RUNOUT6_PIN 8 FIL_RUNOUT7_PIN 9 FIL_RUNOUT8_PIN 10 \
+        FIL_RUNOUT4_STATE HIGH FIL_RUNOUT8_STATE HIGH
+opt_enable FIL_RUNOUT4_PULLUP FIL_RUNOUT8_PULLUP
+exec_test $1 $2 "GTT GTR | OTG USB Flash Drive | 8 Extruders | Auto-Fan | Mixed TMC Drivers | Runout Sensors (distinct)" "$3"
+
+# clean up
+restore_configs

buildroot/tests/BIGTREE_SKR_PRO

@@ -0,0 +1,33 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F407ZG BigTreeTech SKR Pro
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT 1
+exec_test $1 $2 "BigTreeTech SKR Pro | Default Configuration" "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT -1 \
+        EXTRUDERS 3 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 \
+        E0_AUTO_FAN_PIN PC10 E1_AUTO_FAN_PIN PC11 E2_AUTO_FAN_PIN PC12 \
+        X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2130
+opt_enable BLTOUCH EEPROM_SETTINGS AUTO_BED_LEVELING_3POINT Z_SAFE_HOMING PINS_DEBUGGING
+exec_test $1 $2 "BigTreeTech SKR Pro | 3 Extruders | Auto-Fan | BLTOUCH | Mixed TMC" "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT -1 \
+        CUTTER_POWER_UNIT PERCENT \
+        SPINDLE_LASER_PWM_PIN HEATER_1_PIN SPINDLE_LASER_ENA_PIN HEATER_2_PIN \
+        TEMP_SENSOR_COOLER 1000 TEMP_COOLER_PIN PD13
+opt_enable LASER_FEATURE LASER_SAFETY_TIMEOUT_MS REPRAP_DISCOUNT_SMART_CONTROLLER
+exec_test $1 $2 "BigTreeTech SKR Pro | HD44780 | Laser (Percent) | Cooling | LCD" "$3"
+
+# clean up
+restore_configs

buildroot/tests/BTT_SKR_SE_BX

@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+#
+# Build tests for BTT_SKR_SE_BX
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+use_example_configs BIQU/BX
+exec_test $1 $2 "BIQU/BX" "$3"
+
+# clean up
+restore_configs

buildroot/tests/DUE

@@ -0,0 +1,52 @@
+#!/usr/bin/env bash
+#
+# Build tests for DUE (Atmel SAM3X8E ARM Cortex-M3)
+#
+
+# exit on first failure
+set -e
+
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB \
+        LCD_LANGUAGE bg \
+        TEMP_SENSOR_0 -2 TEMP_SENSOR_BED 2 \
+        GRID_MAX_POINTS_X 16 \
+        E0_AUTO_FAN_PIN 8 FANMUX0_PIN 53 EXTRUDER_AUTO_FAN_SPEED 100 \
+        TEMP_SENSOR_CHAMBER 3 TEMP_CHAMBER_PIN 6 HEATER_CHAMBER_PIN 45 \
+        TRAMMING_POINT_XY '{{20,20},{20,20},{20,20},{20,20},{20,20}}' TRAMMING_POINT_NAME_5 '"Point 5"'
+opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS GCODE_MACROS \
+           FIX_MOUNTED_PROBE Z_SAFE_HOMING CODEPENDENT_XY_HOMING \
+           ASSISTED_TRAMMING REPORT_TRAMMING_MM ASSISTED_TRAMMING_WAIT_POSITION \
+           EEPROM_SETTINGS SDSUPPORT BINARY_FILE_TRANSFER \
+           BLINKM PCA9533 PCA9632 RGB_LED RGB_LED_R_PIN RGB_LED_G_PIN RGB_LED_B_PIN \
+           NEOPIXEL_LED NEOPIXEL_PIN CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CASE_LIGHT_USE_RGB_LED CASE_LIGHT_MENU \
+           NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE FILAMENT_RUNOUT_DISTANCE_MM FILAMENT_RUNOUT_SENSOR \
+           AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
+           SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE CALIBRATION_GCODE \
+           BACKLASH_COMPENSATION BACKLASH_GCODE BAUD_RATE_GCODE BEZIER_CURVE_SUPPORT \
+           FWRETRACT ARC_SUPPORT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
+           PSU_CONTROL AUTO_POWER_CONTROL E_DUAL_STEPPER_DRIVERS \
+           PIDTEMPBED SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER \
+           PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL \
+           EXTENSIBLE_UI
+opt_add EXTUI_EXAMPLE
+exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), ExtUI, S-Curve, many options." "$3"
+
+#
+# RADDS with BLTouch, ABL(B), 3 x Z auto-align
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_RADDS Z_DRIVER_TYPE A4988 Z2_DRIVER_TYPE A4988 Z3_DRIVER_TYPE A4988
+opt_enable USE_XMAX_PLUG USE_YMAX_PLUG ENDSTOPPULLUPS BLTOUCH AUTO_BED_LEVELING_BILINEAR \
+           Z_STEPPER_AUTO_ALIGN Z_STEPPER_ALIGN_STEPPER_XY Z_SAFE_HOMING
+pins_set ramps/RAMPS X_MAX_PIN -1
+pins_set ramps/RAMPS Y_MAX_PIN -1
+exec_test $1 $2 "RADDS with ABL (Bilinear), Triple Z Axis, Z_STEPPER_AUTO_ALIGN, E_DUAL_STEPPER_DRIVERS" "$3"
+
+#
+# Test SWITCHING_EXTRUDER
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMPS4DUE_EEF LCD_LANGUAGE fi EXTRUDERS 2 TEMP_SENSOR_BED 0 NUM_SERVOS 1
+opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER BEEP_ON_FEEDRATE_CHANGE POWER_LOSS_RECOVERY
+exec_test $1 $2 "RAMPS4DUE_EEF with SWITCHING_EXTRUDER, POWER_LOSS_RECOVERY" "$3"

buildroot/tests/DUE_archim

@@ -0,0 +1,22 @@
+#!/usr/bin/env bash
+#
+# Build tests for DUE (Atmel SAM3X8E ARM Cortex-M3)
+#
+
+# exit on first failure
+set -e
+
+#
+# Test Archim 1
+#
+use_example_configs UltiMachine/Archim1
+exec_test $1 $2 "Archim 1 base configuration" "$3"
+
+#
+# Test Archim 2
+#
+use_example_configs UltiMachine/Archim2
+opt_enable USB_FLASH_DRIVE_SUPPORT
+exec_test $1 $2 "Archim 2 base configuration" "$3"
+
+restore_configs

buildroot/tests/FLYF407ZG

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+#
+# Build tests for FLYF407ZG
+#
+
+# exit on first failure
+set -e
+
+# Build examples
+restore_configs
+opt_set MOTHERBOARD BOARD_FLYF407ZG SERIAL_PORT -1 X_DRIVER_TYPE TMC2208 Y_DRIVER_TYPE TMC2130
+exec_test $1 $2 "FLYF407ZG Default Config with mixed TMC Drivers" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/FYSETC_F6

@@ -0,0 +1,70 @@
+#!/usr/bin/env bash
+#
+# Build tests for AVR ATmega FYSETC F6 1.3
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default config plus DGUS_LCD_UI FYSETC
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_FYSETC_F6_13 LCD_SERIAL_PORT 1
+opt_enable DGUS_LCD_UI_FYSETC
+exec_test $1 $2 "FYSETC F6 1.3 with DGUS" "$3"
+
+#
+# Delta Config (FLSUN AC because it's complex)
+#
+use_example_configs delta/FLSUN/auto_calibrate
+opt_set MOTHERBOARD BOARD_FYSETC_F6_13
+exec_test $1 $2 "DELTA / FLSUN Auto-Calibrate" "$3"
+
+#
+# Delta Config (generic) + UBL + ALLEN_KEY + EEPROM_SETTINGS + OLED_PANEL_TINYBOY2
+#
+use_example_configs delta/generic
+opt_set MOTHERBOARD BOARD_FYSETC_F6_13 LCD_LANGUAGE ko_KR
+opt_enable RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS EEPROM_CHITCHAT \
+           Z_PROBE_ALLEN_KEY AUTO_BED_LEVELING_UBL UBL_MESH_WIZARD \
+           OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY DELTA_CALIBRATION_MENU BABYSTEPPING
+exec_test $1 $2 "DELTA | UBL | Allen Key | EEPROM | OLED_PANEL_TINYBOY2..." "$3"
+
+#
+# Test mixed TMC config
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_FYSETC_F6_13 \
+        LCD_LANGUAGE vi LCD_LANGUAGE_2 fr \
+        X_DRIVER_TYPE TMC2160 Y_DRIVER_TYPE TMC5160 Z_DRIVER_TYPE TMC2208_STANDALONE E0_DRIVER_TYPE TMC2130 \
+        X_MIN_ENDSTOP_INVERTING true Y_MIN_ENDSTOP_INVERTING true
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \
+           MARLIN_BRICKOUT MARLIN_INVADERS MARLIN_SNAKE \
+           MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD \
+           USE_ZMIN_PLUG SENSORLESS_HOMING TMC_DEBUG M114_DETAIL
+exec_test $1 $2 "RAMPS | Mixed TMC | Sensorless | RRDFGSC | Games" "$3"
+
+#
+# Delta Config (FLSUN AC because it's complex)
+#
+use_example_configs delta/FLSUN/auto_calibrate
+opt_set MOTHERBOARD BOARD_FYSETC_F6_13
+exec_test $1 $2 "RAMPS 1.3 | DELTA | FLSUN AC Config" "$3"
+
+#
+# SCARA with Mixed TMC
+#
+use_example_configs SCARA/Morgan
+opt_set MOTHERBOARD BOARD_FYSETC_F6_13 \
+        LCD_LANGUAGE es \
+        X_MAX_ENDSTOP_INVERTING false \
+        X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2130 Z_DRIVER_TYPE TMC2130_STANDALONE E0_DRIVER_TYPE TMC2660 \
+        X_HARDWARE_SERIAL Serial2
+opt_enable USE_ZMIN_PLUG FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR PAUSE_BEFORE_DEPLOY_STOW \
+           FYSETC_242_OLED_12864 EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL Z_SAFE_HOMING \
+           STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD SENSORLESS_HOMING SQUARE_WAVE_STEPPING
+exec_test $1 $2 "FYSETC_F6 | SCARA | Mixed TMC | EEPROM" "$3"
+
+# clean up
+restore_configs

buildroot/tests/FYSETC_S6

@@ -0,0 +1,28 @@
+#!/usr/bin/env bash
+#
+# Build tests for FYSETC_S6
+#
+
+# exit on first failure
+set -e
+
+# Build examples
+restore_configs
+use_example_configs FYSETC/S6
+opt_enable MEATPACK_ON_SERIAL_PORT_1
+opt_set Y_DRIVER_TYPE TMC2209 Z_DRIVER_TYPE TMC2130
+exec_test $1 $2 "FYSETC S6 Example" "$3"
+
+#
+# Build with FTDI Eve Touch UI and some features
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_FYSETC_S6_V2_0 SERIAL_PORT 1 X_DRIVER_TYPE TMC2130
+opt_enable TOUCH_UI_FTDI_EVE LCD_FYSETC_TFT81050 S6_TFT_PINMAP LCD_LANGUAGE_2 SDSUPPORT CUSTOM_MENU_MAIN \
+           FIX_MOUNTED_PROBE AUTO_BED_LEVELING_UBL Z_SAFE_HOMING \
+           EEPROM_SETTINGS PRINTCOUNTER CALIBRATION_GCODE LIN_ADVANCE \
+           FILAMENT_RUNOUT_SENSOR ADVANCED_PAUSE_FEATURE NOZZLE_PARK_FEATURE
+exec_test $1 $2 "FYSETC S6 2 with LCD FYSETC TFT81050" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/LERDGEK

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+#
+# Build tests for LERDGEK environment
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the typical configuration
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_LERDGE_K SERIAL_PORT 1
+opt_enable TFT_GENERIC TFT_INTERFACE_FSMC TFT_COLOR_UI
+exec_test $1 $2 "LERDGE K with Generic FSMC TFT with ColorUI" "$3"
+
+# clean up
+restore_configs

buildroot/tests/LERDGEX

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+#
+# Build tests for LERDGEX environment
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_LERDGE_X SERIAL_PORT 1
+exec_test $1 $2 "LERDGE X with Default Configuration" "$3"
+
+# clean up
+restore_configs

buildroot/tests/LPC1768

@@ -0,0 +1,63 @@
+#!/usr/bin/env bash
+#
+# Build tests for LPC1768 (NXP ARM Cortex-M3)
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+#restore_configs
+#opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
+#exec_test $1 $2 "Default Configuration" "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB SERIAL_PORT_3 3 \
+        NEOPIXEL_TYPE NEO_RGB RGB_LED_R_PIN P2_12 RGB_LED_G_PIN P1_23 RGB_LED_B_PIN P1_22 RGB_LED_W_PIN P1_24
+opt_enable FYSETC_MINI_12864_2_1 SDSUPPORT SDCARD_READONLY SERIAL_PORT_2 RGBW_LED E_DUAL_STEPPER_DRIVERS \
+           NEOPIXEL_LED NEOPIXEL_IS_SEQUENTIAL NEOPIXEL_STARTUP_TEST NEOPIXEL_BKGD_INDEX_FIRST NEOPIXEL_BKGD_INDEX_LAST NEOPIXEL_BKGD_COLOR NEOPIXEL_BKGD_ALWAYS_ON
+exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel" "$3"
+
+#restore_configs
+#use_example_configs Mks/Sbase
+#exec_test $1 $2 "MKS SBASE Example Config" "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_MKS_SBASE \
+        EXTRUDERS 2 TEMP_SENSOR_1 1 \
+        NUM_SERVOS 2 SERVO_DELAY '{ 300, 300 }' SWITCHING_NOZZLE_SERVO_ANGLES '{ { 0, 90 }, { 90, 0 } }'
+opt_enable SWITCHING_NOZZLE SWITCHING_NOZZLE_E1_SERVO_NR EDITABLE_SERVO_ANGLES SERVO_DETACH_GCODE \
+           ULTIMAKERCONTROLLER REALTIME_REPORTING_COMMANDS FULL_REPORT_TO_HOST_FEATURE
+exec_test $1 $2 "MKS SBASE with SWITCHING_NOZZLE, Grbl Realtime Report" "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB \
+        EXTRUDERS 2 TEMP_SENSOR_1 -4 TEMP_SENSOR_BED 5 \
+        GRID_MAX_POINTS_X 16 \
+        NOZZLE_TO_PROBE_OFFSET '{ 0, 0, 0 }' \
+        NOZZLE_CLEAN_MIN_TEMP 170 \
+        NOZZLE_CLEAN_START_POINT "{ {  10, 10, 3 }, {  10, 10, 3 } }" \
+        NOZZLE_CLEAN_END_POINT "{ {  10, 20, 3 }, {  10, 20, 3 } }"
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
+           FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY PID_EXTRUSION_SCALING SOUND_MENU_ITEM \
+           NOZZLE_AS_PROBE AUTO_BED_LEVELING_BILINEAR PREHEAT_BEFORE_LEVELING G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
+           ASSISTED_TRAMMING ASSISTED_TRAMMING_WIZARD REPORT_TRAMMING_MM ASSISTED_TRAMMING_WAIT_POSITION \
+           BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
+           PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
+           Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
+           HOST_KEEPALIVE_FEATURE HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_STATUS_NOTIFICATIONS \
+           LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES \
+           SDSUPPORT SDCARD_SORT_ALPHA AUTO_REPORT_SD_STATUS EMERGENCY_PARSER SOFT_RESET_ON_KILL SOFT_RESET_VIA_SERIAL
+exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features." "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_SKR_V1_3 EXTRUDERS 2 \
+        TEMP_SENSOR_0 1 TEMP_SENSOR_1 1 TEMP_SENSOR_BED 1 TEMP_SENSOR_CHAMBER 1 \
+        TEMP_CHAMBER_PIN P1_30 HEATER_CHAMBER_PIN P0_28
+opt_enable PIDTEMPBED PIDTEMPCHAMBER PID_EXTRUSION_SCALING PID_FAN_SCALING
+exec_test $1 $2 "SKR v1.3 with 2*Extr, bed, chamber all PID." "$3"
+
+# clean up
+restore_configs

buildroot/tests/LPC1769

@@ -0,0 +1,66 @@
+#!/usr/bin/env bash
+#
+# Build tests for LPC1769 (NXP ARM Cortex-M3)
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+use_example_configs Azteeg/X5GT
+exec_test $1 $2 "Azteeg X5GT Example Configuration" "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD \
+        EXTRUDERS 2 TEMP_SENSOR_0 -5 TEMP_SENSOR_1 -4 TEMP_SENSOR_BED 5 TEMP_0_CS_PIN P1_29 \
+        GRID_MAX_POINTS_X 16 \
+        NOZZLE_CLEAN_START_POINT "{ {  10, 10, 3 }, {  10, 10, 3 } }" \
+        NOZZLE_CLEAN_END_POINT "{ {  10, 20, 3 }, {  10, 20, 3 } }"
+opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
+           MAX31865_SENSOR_OHMS_0 MAX31865_CALIBRATION_OHMS_0 \
+           MAG_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
+           BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BED_TRAMMING_USE_PROBE BED_TRAMMING_VERIFY_RAISED \
+           PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
+           Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
+           LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER
+exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI and many features" "$3"
+
+#restore_configs
+#opt_set MOTHERBOARD BOARD_AZTEEG_X5_MINI_WIFI
+#opt_enable COREYX USE_XMAX_PLUG DAC_MOTOR_CURRENT_DEFAULT \
+#           REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING \
+#           AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS \
+#           FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR FAN_SOFT_PWM \
+#           SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \
+#           SD_ABORT_ON_ENDSTOP_HIT ADVANCED_OK GCODE_MACROS \
+#           VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS \
+#           EXTRA_FAN_SPEED FWRETRACT MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
+#opt_set FAN_MIN_PWM 50 FAN_KICKSTART_TIME 100 XY_FREQUENCY_LIMIT  15
+#exec_test $1 $2 "Azteeg X5 MINI WIFI Many less common options" "$3"
+
+restore_configs
+use_example_configs delta/generic
+opt_set MOTHERBOARD BOARD_COHESION3D_REMIX \
+        TEMP_SENSOR_0 1 \
+        X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2130 Z_DRIVER_TYPE TMC2130 I_DRIVER_TYPE TB6560 \
+        DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 400, 500, 80 }' \
+        DEFAULT_MAX_FEEDRATE '{ 300, 300, 5, 25, 300 }' \
+        DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100, 10000, 3000 }' \
+        MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60, 2*60, 50*60 }' \
+        AXIS_RELATIVE_MODES '{ false, false, false, false, false }' \
+        HOMING_FEEDRATE_MM_M '{ (50*60), (50*60), (4*60), (50*60) }' \
+        HOMING_BUMP_MM '{ 0, 0, 0, 0 }' HOMING_BUMP_DIVISOR '{ 1, 1, 1, 1 }' \
+        NOZZLE_TO_PROBE_OFFSET '{ 0, 0, 0, 0 }' \
+        I_MIN_PIN P1_25
+opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT MECHANICAL_GANTRY_CALIBRATION \
+           TMC_USE_SW_SPI MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z HYBRID_THRESHOLD \
+           SENSORLESS_PROBING Z_SAFE_HOMING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY TMC_DEBUG \
+           AXIS4_ROTATES I_MIN_POS I_MAX_POS I_HOME_DIR I_ENABLE_ON USE_IMIN_PLUG INVERT_I_DIR \
+           EXPERIMENTAL_I2CBUS
+opt_disable PSU_CONTROL Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+exec_test $1 $2 "Cohesion3D Remix DELTA + ABL Bilinear + EEPROM + SENSORLESS_PROBING + I Axis" "$3"
+
+# clean up
+restore_configs

buildroot/tests/NUCLEO_F767ZI

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+#
+# Build tests for NUCLEO_F767ZI
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_NUCLEO_F767ZI SERIAL_PORT -1 X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2208
+opt_enable BLTOUCH Z_SAFE_HOMING REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SPEAKER SOFTWARE_DRIVER_ENABLE
+exec_test $1 $2 "Mixed timer usage" "$3"
+
+# clean up
+restore_configs

buildroot/tests/Opulo_Lumen_REV3

@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+#
+# Build tests for Opulo_Lumen_REV3
+#
+
+# exit on first failure
+set -e
+
+use_example_configs Opulo/Lumen_REV3
+opt_disable TMC_DEBUG
+exec_test $1 $2 "Opulo Lumen REV3 Pick-and-Place" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/PANDA_PI_V29

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+#
+# Build tests for PANDA_PI_V29
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_PANDA_PI_V29 SERIAL_PORT -1 \
+        Z_CLEARANCE_DEPLOY_PROBE 0 Z_CLEARANCE_BETWEEN_PROBES 1 Z_CLEARANCE_MULTI_PROBE 1
+opt_enable BD_SENSOR AUTO_BED_LEVELING_BILINEAR Z_SAFE_HOMING BABYSTEPPING
+exec_test $1 $2 "Panda Pi V29 | BD Sensor | ABL-B" "$3"
+
+# clean up
+restore_configs

buildroot/tests/REMRAM_V1

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+#
+# Build tests for REMRAM_V1
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_REMRAM_V1
+opt_set SERIAL_PORT 1
+exec_test $1 $2 "Default Configuration" "$3"
+
+# clean up
+restore_configs

buildroot/tests/SAMD21_minitronics20

@@ -0,0 +1,32 @@
+#!/usr/bin/env bash
+#
+# Build tests for SAMD21 (Minitronics 2.0)
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_MINITRONICS20 SERIAL_PORT -1 \
+        TEMP_SENSOR_0 11 TEMP_SENSOR_BED 11 \
+        X_DRIVER_TYPE DRV8825 Y_DRIVER_TYPE DRV8825 Z_DRIVER_TYPE DRV8825 E0_DRIVER_TYPE DRV8825 \
+        RESTORE_LEVELING_AFTER_G28 false \
+        LCD_LANGUAGE it \
+        SDCARD_CONNECTION LCD \
+        HOMING_BUMP_MM '{ 0, 0, 0 }'
+opt_enable ENDSTOP_INTERRUPTS_FEATURE BLTOUCH Z_MIN_PROBE_REPEATABILITY_TEST \
+           FILAMENT_RUNOUT_SENSOR G26_MESH_VALIDATION MESH_EDIT_GFX_OVERLAY Z_SAFE_HOMING \
+           EEPROM_SETTINGS NOZZLE_PARK_FEATURE SDSUPPORT SD_CHECK_AND_RETRY \
+           REPRAPWORLD_GRAPHICAL_LCD ADAPTIVE_STEP_SMOOTHING \
+           STATUS_MESSAGE_SCROLLING SET_PROGRESS_MANUALLY SHOW_REMAINING_TIME SET_REMAINING_TIME \
+           LONG_FILENAME_HOST_SUPPORT CUSTOM_FIRMWARE_UPLOAD M20_TIMESTAMP_SUPPORT \
+           SCROLL_LONG_FILENAMES BABYSTEPPING DOUBLECLICK_FOR_Z_BABYSTEPPING \
+           MOVE_Z_WHEN_IDLE BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
+           LIN_ADVANCE ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE MONITOR_DRIVER_STATUS
+exec_test $1 $2 "Minitronics 2.0 with assorted features" "$3"
+
+# clean up
+restore_configs

buildroot/tests/SAMD51_grandcentral_m4

@@ -0,0 +1,34 @@
+#!/usr/bin/env bash
+#
+# Build tests for Adafruit Grand Central M4 (ATMEL ARM Cortex-M4)
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_AGCM4_RAMPS_144 SERIAL_PORT -1 \
+        TEMP_SENSOR_0 11 TEMP_SENSOR_BED 11 \
+        X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209 Z_DRIVER_TYPE TMC2209 Z2_DRIVER_TYPE TMC2209 E0_DRIVER_TYPE TMC2209 \
+        RESTORE_LEVELING_AFTER_G28 false \
+        LCD_LANGUAGE it \
+        SDCARD_CONNECTION LCD \
+        HOMING_BUMP_MM '{ 0, 0, 0 }'
+opt_enable ENDSTOP_INTERRUPTS_FEATURE S_CURVE_ACCELERATION BLTOUCH Z_MIN_PROBE_REPEATABILITY_TEST \
+           FILAMENT_RUNOUT_SENSOR G26_MESH_VALIDATION MESH_EDIT_GFX_OVERLAY Z_SAFE_HOMING \
+           EEPROM_SETTINGS NOZZLE_PARK_FEATURE SDSUPPORT SD_CHECK_AND_RETRY \
+           REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER Z_STEPPER_AUTO_ALIGN ADAPTIVE_STEP_SMOOTHING \
+           STATUS_MESSAGE_SCROLLING SET_PROGRESS_MANUALLY SHOW_REMAINING_TIME SET_REMAINING_TIME \
+           LONG_FILENAME_HOST_SUPPORT CUSTOM_FIRMWARE_UPLOAD M20_TIMESTAMP_SUPPORT \
+           SCROLL_LONG_FILENAMES BABYSTEPPING DOUBLECLICK_FOR_Z_BABYSTEPPING \
+           MOVE_Z_WHEN_IDLE BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
+           LIN_ADVANCE ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE MONITOR_DRIVER_STATUS \
+           SENSORLESS_HOMING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY Z2_STALL_SENSITIVITY \
+           SQUARE_WAVE_STEPPING TMC_DEBUG
+exec_test $1 $2 "Grand Central M4 with assorted features" "$3"
+
+# clean up
+restore_configs

buildroot/tests/STM32F070CB_malyan

@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F070CB Malyan M200 v2
+#
+
+# exit on first failure
+set -e
+
+restore_configs
+opt_set MOTHERBOARD BOARD_MALYAN_M200_V2 SERIAL_PORT -1
+exec_test $1 $2 "Malyan M200 v2 Default Config" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/STM32F070RB_malyan

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F070RB Malyan M200 v2
+#
+
+# exit on first failure
+set -e
+
+restore_configs
+opt_set MOTHERBOARD BOARD_MALYAN_M200_V2
+opt_set SERIAL_PORT -1
+exec_test $1 $2 "Malyan M200 v2 Default Config" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/STM32F103CB_malyan

@@ -0,0 +1,13 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103CB Malyan M200
+#
+
+# exit on first failure
+set -e
+
+use_example_configs Malyan/M200
+exec_test $1 $2 "Malyan M200" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/STM32F103RC_btt

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103RC_btt (BigTreeTech SKR Mini E3)
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0 SERIAL_PORT 1 SERIAL_PORT_2 -1 \
+        X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209 Z_DRIVER_TYPE TMC2209 E0_DRIVER_TYPE TMC2209
+opt_enable CR10_STOCKDISPLAY PINS_DEBUGGING Z_IDLE_HEIGHT ADAPTIVE_STEP_SMOOTHING
+exec_test $1 $2 "BigTreeTech SKR Mini E3 1.0 - TMC2209 HW Serial" "$3"
+
+# clean up
+restore_configs

buildroot/tests/STM32F103RC_btt_USB

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103RC BigTreeTech (SKR Mini v1.1)
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 SERIAL_PORT 1 SERIAL_PORT_2 -1
+exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration" "$3"
+
+# clean up
+restore_configs

buildroot/tests/STM32F103RC_btt_USB_maple

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103RC BigTreeTech (SKR Mini v1.1) with LibMaple STM32F1 HAL
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 SERIAL_PORT 1 SERIAL_PORT_2 -1 BAUDRATE_2 115200
+exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration" "$3"
+
+# clean up
+restore_configs

buildroot/tests/STM32F103RC_btt_maple

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103RC BigTreeTech (SKR Mini E3) with LibMaple STM32F1 HAL
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0 SERIAL_PORT 1 SERIAL_PORT_2 -1 \
+        X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209 Z_DRIVER_TYPE TMC2209 E0_DRIVER_TYPE TMC2209
+opt_enable PINS_DEBUGGING Z_IDLE_HEIGHT
+exec_test $1 $2 "BigTreeTech SKR Mini E3 1.0 - Basic Config with TMC2209 HW Serial" "$3"
+
+# clean up
+restore_configs

buildroot/tests/STM32F103RC_fysetc

@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103RC_fysetc
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+use_example_configs "Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch"
+exec_test $1 $2 "Ender-3 with Cheetah 1.2 | BLTouch" "$3"
+
+# clean up
+restore_configs

buildroot/tests/STM32F103RC_fysetc_maple

@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103RC_fysetc_maple
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+use_example_configs "Creality/Ender-3/FYSETC Cheetah 1.2/base"
+exec_test $1 $2 "Maple build of Cheetah 1.2 Configuration" "$3"
+
+# clean up
+restore_configs

buildroot/tests/STM32F103RC_meeb_maple

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103RC MEEB_3DP (ccrobot-online.com)
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_CCROBOT_MEEB_3DP SERIAL_PORT 1 SERIAL_PORT_2 -1 \
+        X_DRIVER_TYPE TMC2208 Y_DRIVER_TYPE TMC2208 Z_DRIVER_TYPE TMC2208 E0_DRIVER_TYPE TMC2208
+exec_test $1 $2 "MEEB_3DP - Basic Config with TMC2208 SW Serial" "$3"
+
+# clean up
+restore_configs

buildroot/tests/STM32F103RE

@@ -0,0 +1,22 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103RE
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_STM32F103RE SERIAL_PORT -1 EXTRUDERS 2 \
+        NOZZLE_CLEAN_START_POINT "{ {  10, 10, 3 } }" \
+        NOZZLE_CLEAN_END_POINT "{ {  10, 20, 3 } }"
+opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT SDSUPPORT \
+           PAREN_COMMENTS GCODE_MOTION_MODES SINGLENOZZLE TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_PARK \
+           BAUD_RATE_GCODE GCODE_MACROS NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE
+exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT SDSUPPORT PAREN_COMMENTS GCODE_MOTION_MODES" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/STM32F103RE_btt

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103RE BigTreeTech (SKR E3 DIP v1.0)
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP \
+        SERIAL_PORT 1 SERIAL_PORT_2 -1 \
+        X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2130
+exec_test $1 $2 "BTT SKR E3 DIP 1.0 | Mixed TMC Drivers" "$3"
+
+# clean up
+restore_configs

buildroot/tests/STM32F103RE_btt_USB

@@ -0,0 +1,27 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103RE BigTreeTech (SKR E3 DIP v1.0)
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_SKR_E3_DIP SERIAL_PORT 1 SERIAL_PORT_2 -1
+opt_enable SDSUPPORT EMERGENCY_PARSER
+exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Configuration" "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_SKR_CR6 SERIAL_PORT -1 SERIAL_PORT_2 2 TEMP_SENSOR_BED 1
+opt_enable CR10_STOCKDISPLAY SDSUPPORT EMERGENCY_PARSER FAN_SOFT_PWM \
+           NOZZLE_AS_PROBE Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN Z_SAFE_HOMING \
+           PROBE_ACTIVATION_SWITCH PROBE_TARE PROBE_TARE_ONLY_WHILE_INACTIVE \
+           PROBING_HEATERS_OFF PREHEAT_BEFORE_PROBING
+opt_disable NOZZLE_TO_PROBE_OFFSET
+exec_test $1 $2 "BigTreeTech SKR CR6 PROBE_ACTIVATION_SWITCH, Probe Tare" "$3"
+
+# clean up
+restore_configs

buildroot/tests/STM32F103RE_creality

@@ -0,0 +1,43 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103RE_creality
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with configs included in the PR
+#
+use_example_configs "Creality/Ender-3 V2/CrealityV422/CrealityUI"
+opt_enable MARLIN_DEV_MODE BUFFER_MONITORING BLTOUCH AUTO_BED_LEVELING_BILINEAR Z_SAFE_HOMING
+exec_test $1 $2 "Ender-3 V2 - CrealityUI" "$3"
+
+use_example_configs "Creality/Ender-3 V2/CrealityV422/CrealityUI"
+opt_disable DWIN_CREALITY_LCD
+opt_enable DWIN_CREALITY_LCD_JYERSUI AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY
+exec_test $1 $2 "Ender-3 V2 - JyersUI (ABL Bilinear/Manual)" "$3"
+
+use_example_configs "Creality/Ender-3 V2/CrealityV422/CrealityUI"
+opt_disable DWIN_CREALITY_LCD PIDTEMP
+opt_enable DWIN_MARLINUI_LANDSCAPE AUTO_BED_LEVELING_UBL BLTOUCH Z_SAFE_HOMING MPCTEMP
+exec_test $1 $2 "Ender-3 V2 - MarlinUI (UBL+BLTOUCH, MPCTEMP)" "$3"
+
+use_example_configs "Creality/Ender-3 S1/STM32F1"
+opt_disable DWIN_CREALITY_LCD Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN AUTO_BED_LEVELING_BILINEAR CANCEL_OBJECTS FWRETRACT EVENT_GCODE_SD_ABORT
+opt_enable DWIN_LCD_PROUI INDIVIDUAL_AXIS_HOMING_SUBMENU SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT STATUS_MESSAGE_SCROLLING \
+           SOUND_MENU_ITEM PRINTCOUNTER NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE FILAMENT_RUNOUT_SENSOR \
+           BLTOUCH Z_SAFE_HOMING AUTO_BED_LEVELING_UBL MESH_EDIT_MENU \
+           LIMITED_MAX_FR_EDITING LIMITED_MAX_ACCEL_EDITING LIMITED_JERK_EDITING BAUD_RATE_GCODE
+opt_set PREHEAT_3_LABEL '"CUSTOM"' PREHEAT_3_TEMP_HOTEND 240 PREHEAT_3_TEMP_BED 60 PREHEAT_3_FAN_SPEED 128 BOOTSCREEN_TIMEOUT 1100
+exec_test $1 $2 "Ender-3 S1 - ProUI (PIDTEMP)" "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_CREALITY_V452 SERIAL_PORT 1
+opt_disable NOZZLE_TO_PROBE_OFFSET
+opt_enable NOZZLE_AS_PROBE Z_SAFE_HOMING Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN FAN_SOFT_PWM \
+           PROBE_ACTIVATION_SWITCH PROBE_TARE PROBE_TARE_ONLY_WHILE_INACTIVE
+exec_test $1 $2 "Creality V4.5.2 PROBE_ACTIVATION_SWITCH, Probe Tare" "$3"
+
+# clean up
+restore_configs

buildroot/tests/STM32F103VE_ZM3E4V2_USB_maple

@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103VE_ZM3E4V2_USB
+#
+
+# exit on first failure
+set -e
+
+restore_configs
+opt_set MOTHERBOARD BOARD_ZONESTAR_ZM3E4V2 SERIAL_PORT 1
+exec_test $1 $2 "Zonestar ZM3E4 V2.0" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/STM32F103VE_longer

@@ -0,0 +1,23 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103VET6
+#
+
+# exit on first failure
+set -e
+
+use_example_configs Alfawise/U20
+opt_enable BAUD_RATE_GCODE
+exec_test $1 $2 "CLASSIC_UI U20 config" "$3"
+
+use_example_configs Alfawise/U20
+opt_enable BAUD_RATE_GCODE TFT_COLOR_UI
+opt_disable TFT_CLASSIC_UI CUSTOM_STATUS_SCREEN_IMAGE
+exec_test $1 $2 "COLOR_UI U20 config" "$3"
+
+use_example_configs Alfawise/U20-bltouch
+opt_enable BAUD_RATE_GCODE
+exec_test $1 $2 "BLTouch U20 config"
+
+# cleanup
+restore_configs

buildroot/tests/STM32F103VE_longer_maple

@@ -0,0 +1,23 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103VET6 (using maple STM32F1 framework)
+#
+
+# exit on first failure
+set -e
+
+use_example_configs Alfawise/U20
+opt_enable BAUD_RATE_GCODE
+exec_test $1 $2 "Maple - Alfawise U20 - CLASSIC_UI" "$3"
+
+use_example_configs Alfawise/U20
+opt_enable BAUD_RATE_GCODE TFT_COLOR_UI
+opt_disable TFT_CLASSIC_UI CUSTOM_STATUS_SCREEN_IMAGE
+exec_test $1 $2 "Maple - Alfawise U20 - COLOR_UI" "$3"
+
+use_example_configs Alfawise/U20-bltouch
+opt_enable BAUD_RATE_GCODE
+exec_test $1 $2 "Maple - Alfawise U20 - BLTouch"
+
+# cleanup
+restore_configs

buildroot/tests/STM32F401RC_creality

@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F401RC_creality
+#
+
+# exit on first failure
+set -e
+
+use_example_configs "Creality/Ender-3 V2/CrealityV422/MarlinUI"
+opt_enable AUTO_BED_LEVELING_BILINEAR Z_SAFE_HOMING
+opt_set MOTHERBOARD BOARD_CREALITY_V24S1_301F4
+opt_add SDCARD_EEPROM_EMULATION
+exec_test $1 $2 "Ender-3 v2 with MarlinUI" "$3"
+
+# clean up
+restore_configs

buildroot/tests/STM32F407VE_black

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F407VET6
+#
+
+# exit on first failure
+set -e
+
+restore_configs
+use_example_configs STM32/Black_STM32F407VET6
+opt_enable BAUD_RATE_GCODE
+exec_test $1 $2 "Full-featured Sample Black STM32F407VET6 config" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/STM32G0B1RE_btt

@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32G0B1RE_btt / Ender-3 with SKR Mini E3 V3.0 (STM32G0)
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+use_example_configs "Creality/Ender-3/BigTreeTech SKR Mini E3 3.0"
+exec_test $1 $2 "Creality/Ender-3/BigTreeTech SKR Mini E3 3.0" "$3"
+
+# clean up
+restore_configs

buildroot/tests/STM32H743VI_btt

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32H743VI_btt
+# Ender-5 Plus with SKR V3.0 (STM32H7)
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+use_example_configs "Creality/Ender-5 Plus/BigTreeTech SKR 3"
+exec_test $1 $2 "Creality Ender-5 Plus with BigTreeTech SKR 3" "$3"
+
+# clean up
+restore_configs

buildroot/tests/at90usb1286_cdc

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+#
+# Build tests for AT90USB1286 (CDC)
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_BRAINWAVE_PRO
+exec_test $1 $2 "Default Configuration" "$3"
+
+# clean up
+restore_configs

buildroot/tests/at90usb1286_dfu

@@ -0,0 +1,22 @@
+#!/usr/bin/env bash
+#
+# Build tests for AT90USB1286 (DFU)
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_PRINTRBOARD
+exec_test $1 $2 "Printrboard Configuration" "$3"
+
+restore_configs
+opt_set MOTHERBOARD BOARD_PRINTRBOARD_REVF
+opt_enable MINIPANEL
+exec_test $1 $2 "Printrboard RevF with MiniPanel and Stepper DAC (in pins file)" "$3"
+
+# clean up
+restore_configs

buildroot/tests/chitu_f103

@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+#
+# Build tests for chitu_f103 (STM32F103ZE)
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+use_example_configs Tronxy/X5SA
+exec_test $1 $2 "Tronxy/X5SA" "$3"
+
+# clean up
+restore_configs

buildroot/tests/esp32

@@ -0,0 +1,30 @@
+#!/usr/bin/env bash
+#
+# Build tests for ESP32
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_ESPRESSIF_ESP32 TX_BUFFER_SIZE 64 \
+        WIFI_SSID '"ssid"' WIFI_PWD '"password"'
+opt_enable WIFISUPPORT WEBSUPPORT OTASUPPORT GCODE_MACROS BAUD_RATE_GCODE M115_GEOMETRY_REPORT REPETIER_GCODE_M360
+exec_test $1 $2 "ESP32 with WIFISUPPORT and WEBSUPPORT and OTASUPPORT" "$3"
+
+#
+# Build with TMC drivers using hardware serial
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_ESPRESSIF_ESP32 \
+        X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2208 Z_DRIVER_TYPE TMC2209 E0_DRIVER_TYPE TMC2209 \
+        X_HARDWARE_SERIAL Serial1 Y_HARDWARE_SERIAL Serial1 Z_HARDWARE_SERIAL Serial1 E0_HARDWARE_SERIAL Serial1 \
+        X_SLAVE_ADDRESS 0 Y_SLAVE_ADDRESS 1 Z_SLAVE_ADDRESS 2 E0_SLAVE_ADDRESS 3
+opt_enable HOTEND_IDLE_TIMEOUT SOFTWARE_DRIVER_ENABLE
+exec_test $1 $2 "ESP32, TMC HW Serial, Hotend Idle" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/jgaurora_a5s_a1_maple

@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103ZE JGAurora A5S A1
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+use_example_configs JGAurora/A5S
+exec_test $1 $2 "JGAurora/A5S Configuration" "$3"
+
+# clean up
+restore_configs

buildroot/tests/linux_native

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+#
+# Build tests for Linux x86_64
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_SIMULATED TEMP_SENSOR_BED 1
+opt_enable PIDTEMPBED EEPROM_SETTINGS BAUD_RATE_GCODE
+exec_test $1 $2 "Linux with EEPROM" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/malyan_M300

@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F070CB Malyan M300
+#
+
+# exit on first failure
+set -e
+
+restore_configs
+use_example_configs "delta/Malyan M300"
+opt_disable AUTO_BED_LEVELING_3POINT
+opt_set LCD_SERIAL_PORT 1
+exec_test $1 $2 "Malyan M300 (delta)" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/mega1280

@@ -0,0 +1,65 @@
+#!/usr/bin/env bash
+#
+# Build tests for AVR ATmega1280
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+#restore_configs
+#exec_test $1 $2 "Default Configuration" "$3"
+
+#
+# Test MESH_BED_LEVELING feature, with LCD
+#
+restore_configs
+opt_set LCD_LANGUAGE an \
+        POWER_MONITOR_CURRENT_PIN 14 POWER_MONITOR_VOLTAGE_PIN 15 \
+        CLOSED_LOOP_ENABLE_PIN 44 CLOSED_LOOP_MOVE_COMPLETE_PIN 45
+opt_enable SPINDLE_FEATURE ULTIMAKERCONTROLLER LCD_BED_LEVELING \
+           EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT \
+           SENSORLESS_BACKOFF_MM HOMING_BACKOFF_POST_MM HOME_Y_BEFORE_X CODEPENDENT_XY_HOMING \
+           MESH_BED_LEVELING ENABLE_LEVELING_FADE_HEIGHT MESH_G28_REST_ORIGIN \
+           G26_MESH_VALIDATION MESH_EDIT_MENU GCODE_QUOTED_STRINGS \
+           EXTERNAL_CLOSED_LOOP_CONTROLLER POWER_MONITOR_CURRENT POWER_MONITOR_VOLTAGE
+exec_test $1 $2 "Spindle, MESH_BED_LEVELING, closed loop, Power Monitor, and LCD" "$3"
+
+#
+# ...and without PWM
+#
+opt_disable SPINDLE_LASER_USE_PWM
+exec_test $1 $2 "(No PWM)" "$3"
+
+#
+# Test DUAL_X_CARRIAGE
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_ZRIB_V52 \
+        LCD_LANGUAGE pt REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 \
+        EXTRUDERS 2 TEMP_SENSOR_1 1 X2_DRIVER_TYPE A4988
+opt_enable USE_XMAX_PLUG DUAL_X_CARRIAGE REPRAPWORLD_KEYPAD
+opt_add DEBUG_DXC_MODE
+exec_test $1 $2 "ZRIB_V52 | DUAL_X_CARRIAGE" "$3"
+
+#
+# Delta Config (generic) + Probeless
+#
+use_example_configs delta/generic
+opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_AUTO_CALIBRATION DELTA_CALIBRATION_MENU
+exec_test $1 $2 "RAMPS | DELTA | RRD LCD | DELTA_AUTO_CALIBRATION | DELTA_CALIBRATION_MENU" "$3"
+
+#
+# Delta Config (generic) + ABL bilinear + BLTOUCH
+#
+use_example_configs delta/generic
+opt_set LCD_LANGUAGE cz \
+        Z_MIN_PROBE_ENDSTOP_INVERTING false \
+        Z_MIN_ENDSTOP_INVERTING false
+opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH
+exec_test $1 $2 "DELTA | RRD LCD | ABL Bilinear | BLTOUCH" "$3"
+
+# clean up
+restore_configs

buildroot/tests/mega2560

@@ -0,0 +1,279 @@
+#!/usr/bin/env bash
+#
+# Build tests for AVR ATmega2560
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+#restore_configs
+#exec_test $1 $2 "Default Configuration" "$3"
+
+#
+# Build with no source filers
+#
+restore_configs
+ci_src_filter -n
+exec_test $1 $2 "Default Configuration | no source filtering" "$3"
+ci_src_filter -y
+
+#
+# Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders
+#
+use_example_configs AnimationExample
+opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO LCD_LANGUAGE fr SAVED_POSITIONS 4 DEFAULT_EJERK 10 \
+        EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 5 TEMP_SENSOR_3 20 TEMP_SENSOR_4 1000 TEMP_SENSOR_BED 1
+opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \
+           REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \
+           SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT AUTO_REPORT_SD_STATUS SCROLL_LONG_FILENAMES MEDIA_MENU_AT_TOP \
+           EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN FREEZE_FEATURE CANCEL_OBJECTS SOUND_MENU_ITEM \
+           EMERGENCY_PARSER MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE ADVANCE_K_EXTRA QUICK_HOME \
+           SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME \
+           ENCODER_NOISE_FILTER BABYSTEPPING BABYSTEP_XY NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL
+opt_disable ENCODER_RATE_MULTIPLIER
+exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE ..." "$3"
+
+#
+# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
+#
+use_example_configs AnimationExample
+opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO LCD_LANGUAGE jp_kana DEFAULT_EJERK 10 \
+        EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 5 TEMP_SENSOR_3 20 TEMP_SENSOR_4 1000 TEMP_SENSOR_BED 1
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI SHOW_CUSTOM_BOOTSCREEN BOOT_MARLIN_LOGO_SMALL \
+           SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT PRINT_PROGRESS_SHOW_DECIMALS SHOW_REMAINING_TIME STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES \
+           SDSUPPORT LONG_FILENAME_WRITE_SUPPORT SDCARD_SORT_ALPHA NO_SD_AUTOSTART USB_FLASH_DRIVE_SUPPORT CANCEL_OBJECTS \
+           Z_PROBE_SLED AUTO_BED_LEVELING_UBL UBL_HILBERT_CURVE RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION ENABLE_LEVELING_FADE_HEIGHT \
+           EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_MENU_MAIN \
+           MULTI_NOZZLE_DUPLICATION CLASSIC_JERK LIN_ADVANCE QUICK_HOME \
+           NANODLP_Z_SYNC I2C_POSITION_ENCODERS M114_DETAIL \
+           SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \
+           BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET BABYSTEP_DISPLAY_TOTAL
+opt_disable SEGMENT_LEVELED_MOVES
+exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE | Sled Probe | Skew | JP-Kana | Babystep offsets ..." "$3"
+
+#
+# 5 runout sensors with distinct states
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO NUM_SERVOS 1 \
+        EXTRUDERS 4 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 FAN_KICKSTART_TIME 500 \
+        NUM_RUNOUT_SENSORS 4 FIL_RUNOUT2_PIN 44 FIL_RUNOUT3_PIN 45 FIL_RUNOUT4_PIN 46 FIL_RUNOUT5_PIN 47 \
+        FIL_RUNOUT3_STATE HIGH FILAMENT_RUNOUT_SCRIPT '"M600 T%c"'
+opt_enable VIKI2 BOOT_MARLIN_LOGO_ANIMATED SDSUPPORT AUTO_REPORT_SD_STATUS \
+           Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE \
+           EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL AUTO_REPORT_POSITION \
+           NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET JOYSTICK \
+           DIRECT_STEPPING DETECT_BROKEN_ENDSTOP \
+           FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE Z_SAFE_HOMING FIL_RUNOUT3_PULLUP
+exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 4 | VIKI2 | Servo Probe | Multiple runout sensors (x4)" "$3"
+
+
+#
+# Mixing Extruder with 5 steppers, Russian
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO MIXING_STEPPERS 5 LCD_LANGUAGE ru \
+        NUM_RUNOUT_SENSORS E_STEPPERS TEMP_SENSOR_BED 0 REDUNDANT_PART_COOLING_FAN 1 \
+        FIL_RUNOUT2_PIN 16 FIL_RUNOUT3_PIN 17 FIL_RUNOUT4_PIN 4 FIL_RUNOUT5_PIN 5
+opt_enable MIXING_EXTRUDER GRADIENT_MIX GRADIENT_VTOOL CR10_STOCKDISPLAY \
+           USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE CONTROLLER_FAN_IGNORE_Z \
+           FILAMENT_RUNOUT_SENSOR ADVANCED_PAUSE_FEATURE NOZZLE_PARK_FEATURE INPUT_SHAPING_X INPUT_SHAPING_Y
+opt_disable DISABLE_OTHER_EXTRUDERS
+exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Input Shaping | Russian" "$3"
+
+#
+# Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
+#
+#restore_configs
+#opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D \
+#        LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 LCD_FEEDBACK_FREQUENCY_HZ 100
+#opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
+
+#
+# Enable COREXY
+#
+#restore_configs
+#opt_enable COREXY
+#exec_test $1 $2 "Stuff" "$3"
+
+######## Other Standard LCD/Panels ##############
+#
+# ULTRA_LCD
+#
+#restore_configs
+#opt_enable ULTRA_LCD
+#exec_test $1 $2 "Stuff" "$3"
+#
+# DOGLCD
+#
+#restore_configs
+#opt_enable DOGLCD
+#exec_test $1 $2 "Stuff" "$3"
+#
+# MAKRPANEL
+# Needs to use Melzi and Sanguino hardware
+#
+#restore_configs
+#opt_enable MAKRPANEL
+#exec_test $1 $2 "Stuff" "$3"
+#
+# REPRAP_DISCOUNT_SMART_CONTROLLER, SDSUPPORT, BABYSTEPPING, RIGIDBOARD_V2, and DAC_MOTOR_CURRENT_DEFAULT
+#
+#restore_configs
+#opt_set MOTHERBOARD BOARD_RIGIDBOARD_V2
+#opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
+#exec_test $1 $2 "Stuff" "$3"
+#
+# G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
+#
+#restore_configs
+#opt_enable G3D_PANEL SDSUPPORT SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
+#opt_set SDSORT_GCODE true SDSORT_USES_RAM true SDSORT_USES_STACK true SDSORT_CACHE_NAMES true
+#exec_test $1 $2 "Stuff" "$3"
+#
+# REPRAPWORLD_KEYPAD
+#
+# Can't find configuration details to get it to compile
+#restore_configs
+#opt_enable ULTRA_LCD REPRAPWORLD_KEYPAD REPRAPWORLD_KEYPAD_MOVE_STEP
+#exec_test $1 $2 "Stuff" "$3"
+#
+# RA_CONTROL_PANEL
+#
+#restore_configs
+#opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
+#exec_test $1 $2 "Stuff" "$3"
+
+######## I2C LCD/PANELS ##############
+#
+# !!!ATTENTION!!!
+# Most I2C configurations are failing at the moment because they require
+# a different Liquid Crystal library "LiquidTWI2".
+#
+# LCD_SAINSMART_I2C_1602
+#
+#restore_configs
+#opt_enable LCD_SAINSMART_I2C_1602
+#exec_test $1 $2 "Stuff" "$3"
+#
+# LCD_I2C_PANELOLU2
+#
+#restore_configs
+#opt_enable LCD_I2C_PANELOLU2
+#exec_test $1 $2 "Stuff" "$3"
+#
+# LCD_I2C_VIKI
+#
+#restore_configs
+#opt_enable LCD_I2C_VIKI
+#exec_test $1 $2 "Stuff" "$3"
+#
+# LCM1602
+#
+#restore_configs
+#opt_enable LCM1602
+#exec_test $1 $2 "Stuff" "$3"
+
+#
+# Test Laser features with 12864 LCD
+#
+# restore_configs
+# opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 0 LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 TEMP_SENSOR_1 0 SERIAL_PORT_2 2 \
+#         DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 400 }' \
+#         DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
+#         DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
+#         MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
+#         AXIS_RELATIVE_MODES '{ false, false, false }'
+# opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT MEATPACK_ON_SERIAL_PORT_1 \
+#            LASER_FEATURE LASER_SAFETY_TIMEOUT_MS LASER_COOLANT_FLOW_METER AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN LASER_SYNCHRONOUS_M106_M107
+# exec_test $1 $2 "MEGA2560 RAMPS | Laser Options | 12864 | Meatpack | Fan Sync | SERIAL_PORT_2 " "$3"
+
+#
+# Test Laser features with 44780 LCD
+#
+# restore_configs
+# opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 0 LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 TEMP_SENSOR_1 0 \
+#         DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 400 }' \
+#         DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
+#         DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
+#         MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
+#         AXIS_RELATIVE_MODES '{ false, false, false }'
+# opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT PRINTCOUNTER I2C_AMMETER \
+#            LASER_FEATURE LASER_SAFETY_TIMEOUT_MS LASER_COOLANT_FLOW_METER AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN
+# exec_test $1 $2 "MEGA2560 RAMPS | Laser Feature | Air Evacuation | Air Assist | Cooler | Laser Safety Timeout | Flowmeter | 44780 LCD " "$3"
+
+#
+# Test redundant temperature sensors + MAX TC + Backlight Timeout
+#
+# restore_configs
+# opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 1 \
+#         TEMP_SENSOR_0 -2 TEMP_SENSOR_REDUNDANT -2 \
+#         TEMP_SENSOR_REDUNDANT_SOURCE E1 TEMP_SENSOR_REDUNDANT_TARGET E0 \
+#         TEMP_0_CS_PIN 11 TEMP_1_CS_PIN 12 \
+#         LCD_BACKLIGHT_TIMEOUT_MINS 2
+# opt_enable MPCTEMP MINIPANEL
+# opt_disable PIDTEMP
+# exec_test $1 $2 "MEGA2560 RAMPS | Redundant temperature sensor | 2x MAX6675 | BL Timeout" "$3"
+
+#
+# Polargraph Config
+#
+# use_example_configs Polargraph
+# exec_test $1 $2 "RUMBA | POLARGRAPH | RRD LCD" "$3"
+
+#
+# Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+#
+#restore_configs
+#opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
+#for lang in an bg ca cz da de el el_CY en es eu fi fr gl hr hu it jp_kana nl pl pt pt_br ro ru sk sv tr uk vi zh_CN zh_TW test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; exec_test $1 $2 "Stuff" "$3"; done
+#
+#restore_configs
+#opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
+#for lang in an bg ca cz da de el el_CY en es eu fi fr gl hr hu it jp_kana nl pl pt pt_br ro ru sk sv tr uk vi zh_CN zh_TW test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; exec_test $1 $2 "Stuff" "$3"; done
+
+######## Example Configurations ##############
+#
+# Test a basic DUAL_X_CARRIAGE configuration
+#
+# use_example_configs Formbot/T_Rex_3
+# exec_test $1 $2 "Formbot/T_Rex_3 example configuration." "$3"
+
+#
+# BQ Hephestos 2
+#restore_configs
+#use_example_configs BQ/Hephestos_2
+#exec_test $1 $2 "Stuff" "$3"
+
+#
+# Makibox Config  need to check board type for Teensy++ 2.0
+#
+#use_example_configs makibox
+#exec_test $1 $2 "Stuff" "$3"
+
+#
+# tvrrug Config need to check board type for sanguino atmega644p
+#
+#use_example_configs tvrrug/Round2
+#exec_test $1 $2 "Stuff" "$3"
+
+#
+# Test progress display rotation
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMPS_14_EFB
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \
+           SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT SET_REMAINING_TIME SET_INTERACTION_TIME M73_REPORT \
+           SHOW_PROGRESS_PERCENT SHOW_ELAPSED_TIME SHOW_REMAINING_TIME SHOW_INTERACTION_TIME PRINT_PROGRESS_SHOW_DECIMALS
+exec_test $1 $2 "MEGA2560 RAMPS | 128x64 | progress rotation" "$3"
+opt_enable LIGHTWEIGHT_UI
+exec_test $1 $2 "MEGA2560 RAMPS | 128x64 LIGHTWEIGHT_UI | progress rotation" "$3"
+opt_disable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER
+exec_test $1 $2 "MEGA2560 RAMPS | HD44780 | progress rotation" "$3"
+
+# clean up
+restore_configs

buildroot/tests/melzi_optiboot

@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+#
+# Build tests for melzi_optiboot
+#
+
+# exit on first failure
+set -e
+
+#
+# Ender-2
+#
+use_example_configs Creality/Ender-2
+exec_test $1 $2 "Ender-2" "$3"
+
+# clean up
+restore_configs

buildroot/tests/mks_robin

@@ -0,0 +1,13 @@
+#!/usr/bin/env bash
+#
+# Build tests for MKS Robin (HAL/STM32)
+#
+
+# exit on first failure
+set -e
+
+use_example_configs Mks/Robin
+exec_test $1 $2 "MKS Robin base configuration" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/mks_robin_lite_maple

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F1 genericSTM32F103RC
+#
+
+# exit on first failure
+set -e
+
+restore_configs
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_LITE SERIAL_PORT 1
+opt_enable EEPROM_SETTINGS SDSUPPORT
+exec_test $1 $2 "Default Configuration with Fallback SD EEPROM" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/mks_robin_maple

@@ -0,0 +1,23 @@
+#!/usr/bin/env bash
+#
+# Build tests for MKS Robin with LibMaple STM32F1 HAL
+# (STM32F1 genericSTM32F103ZE)
+#
+
+# exit on first failure
+set -e
+
+use_example_configs Mks/Robin
+exec_test $1 $2 "MKS Robin config (FSMC Color UI)" "$3"
+
+#
+# MKS Robin LVGL FSMC
+#
+use_example_configs Mks/Robin
+opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
+opt_enable TFT_LVGL_UI TFT_RES_480x320
+opt_set TFT_ROTATION TFT_ROTATE_180
+exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/mks_robin_mini

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+#
+# Build tests for MKS Robin mini
+# (STM32F1 genericSTM32F103VE)
+#
+
+# exit on first failure
+set -e
+
+use_example_configs Mks/Robin
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_MINI EXTRUDERS 1 TEMP_SENSOR_1 0
+exec_test $1 $2 "MKS Robin mini" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/mks_robin_nano_v1_3_f4_usbmod

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+#
+# Build tests for MKS Robin nano v1.3 with native USB modification
+# (STM32F4 genericSTM32F407VE)
+#
+
+# exit on first failure
+set -e
+
+#
+# MKS/ZNP Robin nano v1.3 with Emulated DOGM FSMC and native USB mod
+#
+use_example_configs Mks/Robin
+opt_add USB_MOD
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V1_3_F4 SERIAL_PORT -1
+exec_test $1 $2 "MKS/ZNP Robin nano v1.3 with Emulated DOGM FSMC (native USB mod)" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/mks_robin_nano_v1v2

@@ -0,0 +1,68 @@
+#!/usr/bin/env bash
+#
+# Build tests for MKS Robin nano
+# (STM32F1 genericSTM32F103VE)
+#
+
+# exit on first failure
+set -e
+
+#
+# MKS Robin nano v1.2 Emulated DOGM FSMC
+#
+use_example_configs Mks/Robin
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
+exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC" "$3"
+
+#
+# MKS Robin nano v2 Emulated DOGM SPI
+# (Robin nano v2 has no FSMC interface)
+#
+use_example_configs Mks/Robin
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
+opt_disable TFT_INTERFACE_FSMC
+opt_enable TFT_INTERFACE_SPI MKS_WIFI_MODULE
+opt_add MKS_TEST
+exec_test $1 $2 "MKS Robin nano v2 Emulated DOGM SPI, MKS_WIFI_MODULE" "$3"
+
+#
+# MKS Robin nano v1.2 LVGL FSMC
+#
+# use_example_configs Mks/Robin
+# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
+# opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
+# opt_enable TFT_LVGL_UI TFT_RES_480x320
+# exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" "$3"
+
+#
+# MKS Robin nano v2 LVGL SPI
+# (Robin nano v2 has no FSMC interface)
+#
+# use_example_configs Mks/Robin
+# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
+# opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
+# opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
+# exec_test $1 $2 "MKS Robin nano v2 LVGL SPI" "$3"
+
+#
+# MKS Robin nano v2 New Color UI 480x320 SPI
+# (Robin nano v2 has no FSMC interface)
+#
+use_example_configs Mks/Robin
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
+opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240
+opt_enable TFT_INTERFACE_SPI TFT_RES_480x320
+exec_test $1 $2 "MKS Robin nano v2 with New Color UI 480x320 SPI" "$3"
+
+#
+# MKS Robin nano v2 LVGL SPI + TMC
+# (Robin nano v2 has no FSMC interface)
+#
+use_example_configs Mks/Robin
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209
+opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
+opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
+exec_test $1 $2 "MKS Robin nano v2 LVGL SPI + TMC" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/mks_robin_nano_v1v2_maple

@@ -0,0 +1,68 @@
+#!/usr/bin/env bash
+#
+# Build tests for MKS Robin nano with LibMaple STM32F1 HAL
+# (STM32F1 genericSTM32F103VE)
+#
+
+# exit on first failure
+set -e
+
+#
+# MKS Robin nano v1.2 Emulated DOGM FSMC
+#
+use_example_configs Mks/Robin
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
+exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC" "$3"
+
+#
+# MKS Robin v2 nano Emulated DOGM SPI
+# (Robin v2 nano has no FSMC interface)
+#
+use_example_configs Mks/Robin
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
+opt_disable TFT_INTERFACE_FSMC
+opt_enable TFT_INTERFACE_SPI
+exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI" "$3"
+
+#
+# MKS Robin v2 nano LVGL SPI
+# (Robin v2 nano has no FSMC interface)
+#
+use_example_configs Mks/Robin
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
+opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240 SERIAL_PORT_2
+opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320 MKS_WIFI_MODULE
+opt_add MKS_TEST
+exec_test $1 $2 "MKS Robin v2 nano LVGL SPI w/ WiFi" "$3"
+
+#
+# MKS Robin v2 nano New Color UI 480x320 SPI
+# (Robin v2 nano has no FSMC interface)
+#
+use_example_configs Mks/Robin
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 TFT_ROTATION TFT_ROTATE_90
+opt_disable TFT_INTERFACE_FSMC
+opt_enable TFT_INTERFACE_SPI BINARY_FILE_TRANSFER
+exec_test $1 $2 "MKS Robin v2 nano New Color UI 240x320 SPI + BINARY_FILE_TRANSFER" "$3"
+
+#
+# MKS Robin v2 nano LVGL SPI + TMC
+# (Robin v2 nano has no FSMC interface)
+#
+use_example_configs Mks/Robin
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209
+opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
+opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
+exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" "$3"
+
+#
+# MKS Robin v2 nano New Color UI 480x320 SPI Without Touch Screen
+#
+use_example_configs Mks/Robin
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
+opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240 TOUCH_SCREEN
+opt_enable TFT_INTERFACE_SPI TFT_RES_480x320 TFT_COLOR_UI
+exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI without TOUCH_SCREEN" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/mks_robin_nano_v1v2_usbmod

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+#
+# Build tests for MKS Robin nano V1.2 and V2 with native USB modification
+# (STM32F1 genericSTM32F103VE)
+#
+
+# exit on first failure
+set -e
+
+#
+# MKS/ZNP Robin nano v1.2 with Emulated DOGM FSMC
+#
+use_example_configs Mks/Robin
+opt_add USB_MOD
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO SERIAL_PORT -1
+exec_test $1 $2 "MKS/ZNP Robin nano v1.2 with Emulated DOGM FSMC (native USB mod)" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/mks_robin_pro2

@@ -0,0 +1,20 @@
+#!/usr/bin/env bash
+#
+# Build tests for mks_robin_pro2 (STM32F407VE)
+#
+
+# exit on first failure
+set -e
+
+#
+# Robin Pro v2 with LVGL TFT
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_PRO_V2 SERIAL_PORT 1
+opt_enable SDSUPPORT USB_FLASH_DRIVE_SUPPORT USE_OTG_USB_HOST MULTI_VOLUME \
+           TFT_GENERIC TFT_INTERFACE_SPI TFT_RES_480x320 TFT_LVGL_UI TOUCH_SCREEN \
+           BLTOUCH Z_SAFE_HOMING LCD_BED_TRAMMING BED_TRAMMING_USE_PROBE
+exec_test $1 $2 "MKS Robin Pro v2 | TFT_LVGL_UI | SD/FD Multi-Volume" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/mks_robin_pro_maple

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+#
+# Build tests for MKS Robin Pro
+#
+
+# exit on first failure
+set -e
+
+use_example_configs Mks/Robin_Pro
+opt_enable EMERGENCY_PARSER
+opt_set SERIAL_PORT 3 \
+        SDCARD_CONNECTION LCD \
+        X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2130 \
+        TEMP_SENSOR_BED 1
+opt_disable SERIAL_PORT_2 THERMAL_PROTECTION_HOTENDS
+exec_test $1 $2 "MKS Robin Pro, TMC Drivers, no thermal protection" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/mks_tinybee

@@ -0,0 +1,31 @@
+#!/usr/bin/env bash
+#
+# Build tests for MKS TinyBee
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with ESP3D WiFi, OTA and custom WIFI commands support
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_MKS_TINYBEE TX_BUFFER_SIZE 64 SERIAL_PORT_2 -1 BAUDRATE_2 250000
+opt_enable ESP3D_WIFISUPPORT
+exec_test $1 $2 "MKS TinyBee with ESP3D_WIFISUPPORT" "$3"
+
+#
+# Build with LCD, SD support and Speaker support
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_MKS_TINYBEE \
+        LCD_LANGUAGE en \
+        LCD_INFO_SCREEN_STYLE 0 \
+        DISPLAY_CHARSET_HD44780 WESTERN \
+        NEOPIXEL_TYPE NEO_RGB
+opt_enable FYSETC_MINI_12864_2_1 SDSUPPORT NO_SD_AUTOSTART \
+           NEOPIXEL_LED LED_CONTROL_MENU LED_USER_PRESET_STARTUP LED_COLOR_PRESETS
+exec_test $1 $2 "MKS TinyBee with NeoPixel LCD, SD and Speaker" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/rambo

@@ -0,0 +1,140 @@
+#!/usr/bin/env bash
+#
+# Build tests for AVR ATmega2560 RAMBo
+#
+
+# exit on first failure
+set -e
+
+#
+# Lots of options - Formerly the first Mega2560 test
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMBO \
+        EXTRUDERS 2 TEMP_SENSOR_0 -2 TEMP_SENSOR_1 1 TEMP_SENSOR_BED 2 \
+        TEMP_SENSOR_PROBE 1 TEMP_PROBE_PIN 12 \
+        TEMP_SENSOR_CHAMBER 3 TEMP_CHAMBER_PIN 3 HEATER_CHAMBER_PIN 45 \
+        GRID_MAX_POINTS_X 16 AUTO_POWER_E_TEMP 80 \
+        FANMUX0_PIN 53
+opt_disable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN USE_WATCHDOG
+opt_enable USE_ZMAX_PLUG REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST \
+           FIX_MOUNTED_PROBE CODEPENDENT_XY_HOMING PIDTEMPBED PTC_PROBE PTC_BED \
+           PREHEAT_BEFORE_PROBING PROBING_HEATERS_OFF PROBING_FANS_OFF PROBING_STEPPERS_OFF WAIT_FOR_BED_HEATER \
+           EEPROM_SETTINGS SDSUPPORT SD_REPRINT_LAST_SELECTED_FILE BINARY_FILE_TRANSFER \
+           BLINKM PCA9533 PCA9632 RGB_LED RGB_LED_R_PIN RGB_LED_G_PIN RGB_LED_B_PIN LED_CONTROL_MENU \
+           NEOPIXEL_LED NEOPIXEL_PIN CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CASE_LIGHT_MENU \
+           PID_PARAMS_PER_HOTEND PID_AUTOTUNE_MENU PID_EDIT_MENU PID_EXTRUSION_SCALING LCD_SHOW_E_TOTAL \
+           PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 LCD_BED_TRAMMING BED_TRAMMING_INCLUDE_CENTER \
+           NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR FILAMENT_RUNOUT_DISTANCE_MM \
+           ADVANCED_PAUSE_FEATURE FILAMENT_LOAD_UNLOAD_GCODES FILAMENT_UNLOAD_ALL_EXTRUDERS \
+           PASSWORD_FEATURE PASSWORD_ON_STARTUP PASSWORD_ON_SD_PRINT_MENU PASSWORD_AFTER_SD_PRINT_END PASSWORD_AFTER_SD_PRINT_ABORT \
+           AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DISTINCT_E_FACTORS \
+           SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \
+           BACKLASH_COMPENSATION BACKLASH_GCODE BAUD_RATE_GCODE BEZIER_CURVE_SUPPORT \
+           FWRETRACT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
+           PSU_CONTROL LED_POWEROFF_TIMEOUT PS_OFF_CONFIRM PS_OFF_SOUND POWER_OFF_WAIT_FOR_COOLDOWN \
+           POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE POWER_LOSS_RECOVER_ZHOME POWER_LOSS_ZHOME_POS \
+           SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE ADVANCE_K_EXTRA \
+           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_STATUS_NOTIFICATIONS PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
+opt_add DEBUG_POWER_LOSS_RECOVERY
+exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..." "$3"
+
+#
+# Full size Rambo Dual Endstop CNC
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMBO \
+        EXTRUDERS 0 TEMP_SENSOR_0 999 DUMMY_THERMISTOR_999_VALUE 170 Z_HOME_DIR 1 \
+        DIGIPOT_MOTOR_CURRENT '{ 120, 120, 120, 120, 120 }' \
+        DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 4000 }' \
+        DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
+        DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
+        MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
+        AXIS_RELATIVE_MODES '{ false, false, false }' \
+        BED_TRAMMING_LEVELING_ORDER '{ LF, RF }' \
+        X2_DRIVER_TYPE A4988 Y2_DRIVER_TYPE A4988
+opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \
+           REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER REVERSE_ENCODER_DIRECTION SDSUPPORT EEPROM_SETTINGS \
+           S_CURVE_ACCELERATION X_DUAL_ENDSTOPS Y_DUAL_ENDSTOPS \
+           ADAPTIVE_STEP_SMOOTHING CNC_COORDINATE_SYSTEMS GCODE_MOTION_MODES \
+           LCD_BED_TRAMMING BED_TRAMMING_INCLUDE_CENTER
+opt_disable MIN_SOFTWARE_ENDSTOP_Z MAX_SOFTWARE_ENDSTOPS
+exec_test $1 $2 "Rambo CNC Configuration" "$3"
+
+#
+# Rambo heated bed and probe temp sensor
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMBO EXTRUDERS 0 TEMP_SENSOR_BED 1 TEMP_SENSOR_PROBE 1 TEMP_PROBE_PIN 12 \
+        DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 4000 }' \
+        DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
+        DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
+        MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
+        AXIS_RELATIVE_MODES '{ false, false, false }'
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER FIX_MOUNTED_PROBE Z_SAFE_HOMING
+exec_test $1 $2 "Rambo heated bed only" "$3"
+
+#
+# Rambo with MMU2
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMBO EXTRUDERS 5 MMU_MODEL PRUSA_MMU2
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE EMERGENCY_PARSER MMU2_DEBUG
+exec_test $1 $2 "Rambo with PRUSA_MMU2 " "$3"
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_EINSY_RAMBO \
+        X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2130 Z_DRIVER_TYPE TMC2130 E0_DRIVER_TYPE TMC2130
+exec_test $1 $2 "Einsy RAMBo with TMC2130" "$3"
+
+#
+# Test MINIRAMBO with PWM_MOTOR_CURRENT and many features
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_MINIRAMBO \
+        CONTROLLERFAN_SPEED_IDLE 128 \
+        PWM_MOTOR_CURRENT '{ 1300, 1300, 1250 }' \
+        I2C_SLAVE_ADDRESS 63
+opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \
+          SDSUPPORT PCA9632 SOUND_MENU_ITEM GCODE_REPEAT_MARKERS \
+          AUTO_BED_LEVELING_LINEAR PROBE_MANUALLY LCD_BED_LEVELING \
+          LIN_ADVANCE ADVANCE_K_EXTRA \
+          INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT EXPERIMENTAL_I2CBUS M100_FREE_MEMORY_WATCHER \
+          NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE \
+          ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES \
+          PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 M114_DETAIL
+opt_add M100_FREE_MEMORY_DUMPER
+opt_add M100_FREE_MEMORY_CORRUPTOR
+exec_test $1 $2 "MINIRAMBO | RRDGFSC | ABL Linear Manual | M100 | PWM_MOTOR_CURRENT | M600..." "$3"
+
+#
+# Test many less common options
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMBO \
+        TEMP_SENSOR_0 -2 \
+        DIGIPOT_I2C_NUM_CHANNELS 5 \
+        LCD_LANGUAGE it \
+        MIXING_STEPPERS 2 \
+        SERVO_DELAY '{ 300, 300, 300 }' \
+        CONTROLLER_FAN_PIN X_MAX_PIN FILWIDTH_PIN 5 \
+        FAN_MIN_PWM 50 FAN_KICKSTART_TIME 100 \
+        XY_FREQUENCY_LIMIT 15
+opt_enable COREYX USE_XMAX_PLUG MIXING_EXTRUDER GRADIENT_MIX \
+           BABYSTEPPING BABYSTEP_DISPLAY_TOTAL FILAMENT_LCD_DISPLAY \
+           REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER MENU_ADDAUTOSTART SDSUPPORT SDCARD_SORT_ALPHA \
+           ENDSTOP_NOISE_THRESHOLD FAN_SOFT_PWM \
+           FIX_MOUNTED_PROBE PROBING_ESTEPPERS_OFF PROBE_OFFSET_WIZARD \
+           AUTO_BED_LEVELING_BILINEAR X_AXIS_TWIST_COMPENSATION MESH_EDIT_MENU DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION \
+           Z_SAFE_HOMING SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER \
+           SD_ABORT_ON_ENDSTOP_HIT HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_STATUS_NOTIFICATIONS HOST_PAUSE_M76 ADVANCED_OK M114_DETAIL \
+           VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS EXTRA_FAN_SPEED FWRETRACT \
+           USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE CONTROLLER_FAN_USE_Z_ONLY
+opt_disable DISABLE_OTHER_EXTRUDERS
+exec_test $1 $2 "Rambo | CoreXY, Gradient Mix | Endstop Int. | Home Y > X | FW Retract ..." "$3"
+
+# clean up
+restore_configs

buildroot/tests/rumba32

@@ -0,0 +1,32 @@
+#!/usr/bin/env bash
+#
+# Build tests for rumba32
+#
+
+# exit on first failure
+set -e
+
+# Build examples
+restore_configs
+opt_set MOTHERBOARD BOARD_RUMBA32_V1_0 SERIAL_PORT -1 \
+        TEMP_SENSOR_BED 1 X_DRIVER_TYPE TMC2130
+opt_disable PIDTEMP
+opt_enable PIDTEMPBED FAN_SOFT_PWM
+opt_disable THERMAL_PROTECTION_BED
+exec_test $1 $2 "RUMBA32 V1.0 with TMC2130, PID Bed, no Bed Thermal Protection" "$3"
+
+# Build examples
+restore_configs
+opt_set MOTHERBOARD BOARD_RUMBA32_V1_1 SERIAL_PORT -1 \
+        TEMP_SENSOR_BED 1 X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2208
+opt_enable PIDTEMPBED FAN_SOFT_PWM EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+exec_test $1 $2 "RUMBA32 V1.1 with TMC2130, TMC2208, PID Bed, EEPROM settings, and graphic LCD controller" "$3"
+
+# Build examples
+restore_configs
+opt_set MOTHERBOARD BOARD_RUMBA32_MKS SERIAL_PORT -1 X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2208
+opt_enable FAN_SOFT_PWM
+exec_test $1 $2 "RUMBA32 MKS Default Config with Mixed TMC Drivers" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/sanguino1284p

@@ -0,0 +1,28 @@
+#!/usr/bin/env bash
+#
+# Build tests for AVR ATmega 1284p
+#
+
+# exit on first failure
+set -e
+
+#
+# Start with default configurations...
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12 \
+        LCD_LANGUAGE de \
+        CONTROLLER_FAN_PIN 27
+opt_enable MINIPANEL USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE
+exec_test $1 $2 "Default Configuration | MINIPANAL | CONTROLLER_FAN" "$3"
+
+#
+# Start with default configurations...
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_MELZI
+opt_enable ZONESTAR_LCD
+exec_test $1 $2 "Default Configuration | ZONESTAR_LCD " "$3"
+
+# clean up
+restore_configs

buildroot/tests/sanguino644p

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+#
+# Build tests for AVR ATmega 644p
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_SANGUINOLOLU_12
+exec_test $1 $2 "Default Configuration" "$3"
+
+# clean up
+restore_configs

buildroot/tests/teensy31

@@ -0,0 +1,37 @@
+#!/usr/bin/env bash
+#
+# Build tests for Teensy 3.1/3.2 (ARM Cortex-M4)
+#
+
+# exit on first failure
+set -e
+
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY31_32
+exec_test $1 $2 "Teensy3.1 with default config" "$3"
+
+#
+# Zero endstops, as with a CNC
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY31_32 X_HOME_DIR 0 Y_HOME_DIR 0 Z_HOME_DIR 0
+opt_disable USE_XMIN_PLUG USE_YMIN_PLUG USE_ZMIN_PLUG
+exec_test $1 $2 "Teensy3.1 with Zero Endstops" "$3"
+
+#
+# Test many features together
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY31_32 \
+        TEMP_SENSOR_0 1 TEMP_SENSOR_BED 1 \
+        I2C_SLAVE_ADDRESS 63 \
+        GRID_MAX_POINTS_X 16
+opt_enable EEPROM_SETTINGS FILAMENT_WIDTH_SENSOR CALIBRATION_GCODE BAUD_RATE_GCODE \
+           FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR DEBUG_LEVELING_FEATURE Z_MIN_PROBE_REPEATABILITY_TEST \
+           BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET PRINTCOUNTER SLOW_PWM_HEATERS PIDTEMPBED \
+           INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER \
+           NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PARK_HEAD_ON_PAUSE \
+           ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES \
+           PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \
+           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_STATUS_NOTIFICATIONS
+exec_test $1 $2 "Teensy3.1 with many features" "$3"

buildroot/tests/teensy35

@@ -0,0 +1,112 @@
+#!/usr/bin/env bash
+#
+# Build tests for Teensy 3.5/3.6 (ARM Cortex-M4)
+#
+
+# exit on first failure
+set -e
+
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY35_36
+exec_test $1 $2 "Teensy3.5 with default config" "$3"
+
+#
+# Test as many features together as possible
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY35_36 \
+        EXTRUDERS 2 TEMP_SENSOR_0 1 TEMP_SENSOR_1 5 TEMP_SENSOR_BED 1 \
+        I2C_SLAVE_ADDRESS 63 \
+        GRID_MAX_POINTS_X 16 \
+        NOZZLE_CLEAN_START_POINT "{ {  10, 10, 3 }, {  10, 10, 3 } }" \
+        NOZZLE_CLEAN_END_POINT "{ {  10, 20, 3 }, {  10, 20, 3 } }"
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT SDCARD_SORT_ALPHA \
+           LCD_INFO_MENU LCD_PRINTER_INFO_IS_BOOTSCREEN TURBO_BACK_MENU_ITEM PREHEAT_SHORTCUT_MENU_ITEM \
+           FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY CALIBRATION_GCODE BAUD_RATE_GCODE SOUND_MENU_ITEM \
+           FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
+           BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
+           PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER \
+           ADVANCED_PAUSE_FEATURE ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES PARK_HEAD_ON_PAUSE \
+           PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \
+           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_STATUS_NOTIFICATIONS
+exec_test $1 $2 "Teensy3.5 with many features" "$3"
+
+#
+# Test a Sled Z Probe with Linear leveling
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY35_36
+opt_enable EEPROM_SETTINGS Z_PROBE_SLED Z_SAFE_HOMING AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS
+exec_test $1 $2 "Sled Z Probe with Linear leveling" "$3"
+
+#
+# Test a Servo Probe
+#
+# restore_configs
+# opt_set MOTHERBOARD BOARD_TEENSY35_36 NUM_SERVOS 1
+# opt_enable Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \
+#            AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
+# exec_test $1 $2 "Servo Probe"
+#
+# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
+#
+# opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS \
+#            EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
+# exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES"
+
+#
+# Test MAGNETIC_PARKING_EXTRUDER with LCD
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY35_36 EXTRUDERS 2 TEMP_SENSOR_1 1 SOL0_PIN 29 EXTRUDERS 2
+opt_enable PARKING_EXTRUDER ULTIMAKERCONTROLLER
+exec_test $1 $2 "PARKING_EXTRUDER with LCD" "$3"
+
+#
+# Mixing Extruder
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY35_36 MIXING_STEPPERS 2
+opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+opt_disable DISABLE_OTHER_EXTRUDERS
+exec_test $1 $2 "Mixing Extruder" "$3"
+
+#
+# Test SWITCHING_EXTRUDER
+#
+# restore_configs
+# opt_set MOTHERBOARD BOARD_TEENSY35_36 EXTRUDERS 2 NUM_SERVOS 1
+# opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
+# exec_test $1 $2 "SWITCHING_EXTRUDER"
+
+#
+# Enable COREXY
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY35_36 \
+        X_DRIVER_TYPE TMC5160 Y_DRIVER_TYPE TMC5160 \
+        X_MIN_ENDSTOP_INVERTING true Y_MIN_ENDSTOP_INVERTING true \
+        X_CURRENT_HOME 750 Y_CURRENT_HOME 750 \
+        X_CS_PIN 46 Y_CS_PIN 47
+opt_enable COREXY MONITOR_DRIVER_STATUS SENSORLESS_HOMING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY
+exec_test $1 $2 "Teensy 3.5/3.6 COREXY" "$3"
+
+#
+# Enable COREXZ
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY35_36
+opt_enable COREXZ BACKLASH_COMPENSATION BACKLASH_GCODE CORE_BACKLASH
+exec_test $1 $2 "Teensy 3.5/3.6 COREXZ | BACKLASH" "$3"
+
+#
+# Enable Dual Z with Dual Z endstops
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY35_36 Z_DRIVER_TYPE A4988 Z2_DRIVER_TYPE A4988 Z2_MIN_PIN 2
+opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG
+pins_set ramps/RAMPS X_MAX_PIN -1
+exec_test $1 $2 "Dual Z with Dual Z endstops" "$3"
+
+# Clean up
+restore_configs

buildroot/tests/teensy41

@@ -0,0 +1,114 @@
+#!/usr/bin/env bash
+#
+# Build tests for Teensy 4.0/4.1 (ARM Cortex-M7)
+#
+
+# exit on first failure
+set -e
+
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY41
+exec_test $1 $2 "Teensy4.1 with default config" "$3"
+
+#
+# Test as many features together as possible
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY41 \
+        EXTRUDERS 2 TEMP_SENSOR_0 -5 TEMP_SENSOR_1 5 TEMP_SENSOR_BED 1 TEMP_0_CS_PIN 23 \
+        I2C_SLAVE_ADDRESS 63 \
+        GRID_MAX_POINTS_X 16 \
+        NOZZLE_CLEAN_START_POINT "{ {  10, 10, 3 }, {  10, 10, 3 } }" \
+        NOZZLE_CLEAN_END_POINT "{ {  10, 20, 3 }, {  10, 20, 3 } }"
+opt_enable MAX31865_SENSOR_OHMS_0 MAX31865_CALIBRATION_OHMS_0 \
+           EXTENSIBLE_UI LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \
+           FILAMENT_LCD_DISPLAY CALIBRATION_GCODE BAUD_RATE_GCODE \
+           FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
+           BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET \
+           PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
+           ADVANCED_PAUSE_FEATURE ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES PARK_HEAD_ON_PAUSE \
+           PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \
+           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_STATUS_NOTIFICATIONS
+opt_add EXTUI_EXAMPLE
+exec_test $1 $2 "Teensy4.1 with many features" "$3"
+
+#
+# Test a Sled Z Probe with Linear leveling
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY41
+opt_enable EEPROM_SETTINGS Z_PROBE_SLED Z_SAFE_HOMING AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS
+exec_test $1 $2 "Sled Z Probe with Linear leveling" "$3"
+
+#
+# Test a Servo Probe
+#
+# restore_configs
+# opt_set MOTHERBOARD BOARD_TEENSY41
+# opt_enable Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \
+#            AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
+# opt_set NUM_SERVOS 1
+# exec_test $1 $2 "Servo Probe" "$3"
+#
+# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
+#
+# opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS \
+#            EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
+# exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES" "$3"
+
+#
+# Test MAGNETIC_PARKING_EXTRUDER with no LCD
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY41 SERIAL_PORT_2 -2 \
+        EXTRUDERS 2 TEMP_SENSOR_1 1
+opt_enable EEPROM_SETTINGS MAGNETIC_PARKING_EXTRUDER
+exec_test $1 $2 "Ethernet, EEPROM, Magnetic Parking Extruder, No LCD" "$3"
+
+#
+# Mixing Extruder
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY41 MIXING_STEPPERS 2
+opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL
+opt_disable DISABLE_OTHER_EXTRUDERS
+exec_test $1 $2 "Mixing Extruder" "$3"
+
+#
+# Test SWITCHING_EXTRUDER
+#
+# restore_configs
+# opt_set MOTHERBOARD BOARD_TEENSY41 EXTRUDERS 2 NUM_SERVOS 1
+# opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
+# exec_test $1 $2 "SWITCHING_EXTRUDER" "$3"
+
+#
+# Enable COREXY
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY41 \
+        X_DRIVER_TYPE TMC5160 Y_DRIVER_TYPE TMC5160 \
+        X_MIN_ENDSTOP_INVERTING true Y_MIN_ENDSTOP_INVERTING true \
+        X_CS_PIN 46 Y_CS_PIN 47
+opt_enable COREXY USE_ZMIN_PLUG MONITOR_DRIVER_STATUS SENSORLESS_HOMING
+exec_test $1 $2 "Teensy 4.0/4.1 COREXY" "$3"
+
+#
+# Enable COREXZ
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY41
+opt_enable COREXZ
+exec_test $1 $2 "Teensy 4.0/4.1 COREXZ" "$3"
+
+#
+# Enable Dual Z with Dual Z endstops
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_TEENSY41 Z_DRIVER_TYPE A4988 Z2_DRIVER_TYPE A4988 Z2_MIN_PIN 2
+opt_enable Z_MULTI_ENDSTOPS USE_XMAX_PLUG
+pins_set ramps/RAMPS X_MAX_PIN -1
+exec_test $1 $2 "Dual Z with Dual Z endstops" "$3"
+
+# Clean up
+restore_configs