diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 898f194..0e37c95 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -61,7 +61,7 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(Tomislav Kopić, custom config)" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
 /**
@@ -666,8 +666,8 @@
  * PIDTEMP : PID temperature control (~4.1K)
  * MPCTEMP : Predictive Model temperature control. (~1.8K without auto-tune)
  */
-//#define PIDTEMP           // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
-#define MPCTEMP         // ** EXPERIMENTAL ** See https://marlinfw.org/docs/features/model_predictive_control.html
+#define PIDTEMP           // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
+//#define MPCTEMP         // ** EXPERIMENTAL ** See https://marlinfw.org/docs/features/model_predictive_control.html
 
 #define PID_MAX  255      // Limit hotend current while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
 #define PID_K1     0.95   // Smoothing factor within any PID loop
@@ -1205,7 +1205,7 @@
  * Override with M203
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_FEEDRATE          { 130, 130, 8, 60 }
+#define DEFAULT_MAX_FEEDRATE          { 120, 120, 8, 60 }
 
 //#define LIMITED_MAX_FR_EDITING        // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
 #if ENABLED(LIMITED_MAX_FR_EDITING)
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 14b5db8..5280a4f 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -605,7 +605,7 @@
  *   PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
  *   USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
  */
-#define FAST_PWM_FAN    // Increase the fan PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
+//#define FAST_PWM_FAN    // Increase the fan PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
 #if ENABLED(FAST_PWM_FAN)
   //#define FAST_PWM_FAN_FREQUENCY 31400  // Define here to override the defaults below
   //#define USE_OCR2A_AS_TOP