tomislav/Marlin
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Update config

Browse Source
This commit is contained in:
Tomislav Kopić
2026-01-29 09:26:38 +01:00
parent cc90375396
commit de8c5153ed
2 changed files with 15 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
Marlin/Configuration.h
View File

@@ -1234,9 +1234,9 @@
* M204 R Retract Acceleration
* M204 T Travel Acceleration
*/
#define DEFAULT_ACCELERATION 400 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1200 // X, Y, Z acceleration for travel (non printing) moves
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1200 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
/**
* Default Jerk limits (mm/s)
@@ -1248,8 +1248,8 @@
*/
#define CLASSIC_JERK
#if ENABLED(CLASSIC_JERK)
#define DEFAULT_XJERK 10.0
#define DEFAULT_YJERK 10.0
#define DEFAULT_XJERK 15.0
#define DEFAULT_YJERK 15.0
#define DEFAULT_ZJERK 0.3
//#define DEFAULT_IJERK 0.3
//#define DEFAULT_JJERK 0.3
@@ -1262,11 +1262,11 @@
//#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
#if ENABLED(LIMITED_JERK_EDITING)
#define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits
#define MAX_JERK_EDIT_VALUES { 30, 30, 0.6, 10 } // ...or, set your own edit limits
#endif
#endif
#define DEFAULT_EJERK 8.0 // May be used by Linear Advance
#define DEFAULT_EJERK 15.0 // May be used by Linear Advance
/**
* Junction Deviation Factor
@@ -1289,7 +1289,7 @@
*
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/
#define S_CURVE_ACCELERATION
// #define S_CURVE_ACCELERATION
//===========================================================================
//============================= Z Probe Options =============================

14
Marlin/Configuration_adv.h
View File

@@ -2390,18 +2390,18 @@
// The number of linear moves that can be in the planner at once.
// The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g., 8, 16, 32)
#if BOTH(SDSUPPORT, DIRECT_STEPPING)
#define BLOCK_BUFFER_SIZE 8
#define BLOCK_BUFFER_SIZE 48
#elif ENABLED(SDSUPPORT)
#define BLOCK_BUFFER_SIZE 16
#define BLOCK_BUFFER_SIZE 48
#else
#define BLOCK_BUFFER_SIZE 32
#define BLOCK_BUFFER_SIZE 48
#endif
// @section serial
// The ASCII buffer for serial input
#define MAX_CMD_SIZE 128
#define BUFSIZE 32
#define MAX_CMD_SIZE 378
#define BUFSIZE 48
// Transmission to Host Buffer Size
// To save 386 bytes of flash (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
@@ -2410,13 +2410,13 @@
// For debug-echo: 128 bytes for the optimal speed.
// Other output doesn't need to be that speedy.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 4
#define TX_BUFFER_SIZE 8
// Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
#define RX_BUFFER_SIZE 2048
#define RX_BUFFER_SIZE 1024
#if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to