Update Readme.md
This commit is contained in:
@@ -21,7 +21,7 @@ show notifications, display the weather, monitor stuff, show a clock, serve a we
|
|||||||
|
|
||||||
| **Component** | **Quantity** | **Description** | **Notes** |
|
| **Component** | **Quantity** | **Description** | **Notes** |
|
||||||
|---------------------------|--------------|-------------------------------------------|---------------------------------------------|
|
|---------------------------|--------------|-------------------------------------------|---------------------------------------------|
|
||||||
| ESP8266 D1 Mini or ESP32 S2 Mini | 1 | Microcontroller module | |
|
| ESP8266 D1 Mini | 1 | Microcontroller module | |
|
||||||
| SSD1306 OLED Display | 1 | 128x64 resolution, I2C interface | |
|
| SSD1306 OLED Display | 1 | 128x64 resolution, I2C interface | |
|
||||||
| 14250 Rechargeable Battery| 1 | Lithium-ion battery | Make sure you get the rechargeable type, most 14250 are not |
|
| 14250 Rechargeable Battery| 1 | Lithium-ion battery | Make sure you get the rechargeable type, most 14250 are not |
|
||||||
| TP4056 Module | 1 | Charging and protection circuit | Does not need to have a USB connector |
|
| TP4056 Module | 1 | Charging and protection circuit | Does not need to have a USB connector |
|
||||||
@@ -84,14 +84,14 @@ This is meant to provide a minimal starting point for further development with t
|
|||||||
|
|
||||||
## Assembly Instructions
|
## Assembly Instructions
|
||||||
|
|
||||||
1. Push the ESP8266 or ESP32 microcontroller in the ledge on the bottom [the cube body](https://git.kopic.hr/tomislav/SmartCubeV1/raw/branch/main/hardware/case/SmartCube_Body_3_button.stl) with the USB-C port facing the hole.
|
1. Push the ESP8266 microcontroller in the ledge on the bottom [the cube body](https://git.kopic.hr/tomislav/SmartCubeV1/raw/branch/main/hardware/case/SmartCube_Body_3_button.stl) it sould 'click in' with the USB-C port facing the hole.
|
||||||
Body with 3 or 4 button slots is available in the `hardware/case/`
|
Body with 3 or 4 button slots is available in the `hardware/case/`
|
||||||
|
|
||||||
2. **Buttons**: You can also glue in the buttons to the top slots at this step
|
2. **Buttons**: You can also glue in the buttons to the top slots at this step
|
||||||
|
|
||||||

|

|
||||||
|
|
||||||
3. **OLED Display**: Crew in or glue the SSD1306 to the [front part of the cube](https://git.kopic.hr/tomislav/SmartCubeV1/raw/branch/main/hardware/case/SmartCube_Front.stl) solder the wires to the OLED
|
3. **OLED Display**: Crew in or glue the SSD1306 to the [front part of the cube](https://git.kopic.hr/tomislav/SmartCubeV1/raw/branch/main/hardware/case/SmartCube_Front.stl) solder the 4 wires to the OLED display, make sure you have some extra lenght, 4-5cm sould be more than enough
|
||||||
|
|
||||||

|

|
||||||
|
|
||||||
|
Reference in New Issue
Block a user