From 60dbd3852c26bd6e283fa285bda3330ba2de9930 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Tomislav=20Kopi=C4=87?= Date: Fri, 1 Aug 2025 07:42:49 +0000 Subject: [PATCH] Update Readme.md --- Readme.md | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/Readme.md b/Readme.md index 5a6b422..c77b368 100644 --- a/Readme.md +++ b/Readme.md @@ -25,11 +25,11 @@ show notifications, display the weather, monitor stuff, show a clock, serve a we | SSD1306 OLED Display | 1 | 128x64 resolution, I2C interface | | | 14250 Rechargeable Battery| 1 | Lithium-ion battery | Make sure you get the rechargeable type, most 14250 are not | | TP4056 Module | 1 | Charging and protection circuit | Does not need to have a USB connector | -| Push Buttons | 3 | Tactile push buttons | | +| Push Buttons | 3 or 4 | Tactile push buttons | | | Piezo Buzzer | 1 | 20mm buzzer for audio feedback | | -| Resistors (10kΩ) | 3 | Pull-down resistors for buttons | Not reqired if you are using ESP32 | +| Resistors (10kΩ) | 3 or 4 | Pull-down resistors for buttons | Not reqired if you are using ESP32 | | Wires | Several | For connections | | -| Enclosure | 1 | 3D-printed or custom-made case | 3D printable STL files are in `hardware/case/` | +| Enclosure | 1 | 3D-printed or custom-made case | 3D printable STL files are in `hardware/case/` | | 2x6mm screw | 12 | Small screws for seembling the case | Does not have to be exactly 6mm long | --- @@ -84,7 +84,8 @@ This is meant to provide a minimal starting point for further development with t ## Assembly Instructions -1. Push the ESP8266 or ESP32 microcontroller in the ledge on the bottom [the cube body](https://git.kopic.hr/tomislav/SmartCubeV1/raw/branch/main/hardware/case/SmartCube_Body_3_button.stl) with the USB-C port facing the hole. Body with 3 or 4 button slots is available in the `hardware/case/` +1. Push the ESP8266 or ESP32 microcontroller in the ledge on the bottom [the cube body](https://git.kopic.hr/tomislav/SmartCubeV1/raw/branch/main/hardware/case/SmartCube_Body_3_button.stl) with the USB-C port facing the hole. +Body with 3 or 4 button slots is available in the `hardware/case/` 2. **Buttons**: You can also glue in the buttons to the top slots at this step