Optimizations
This commit is contained in:
parent
7b96ba2d19
commit
67a5277d2a
171
CubeGotchi.ino
171
CubeGotchi.ino
@ -13,30 +13,14 @@
|
||||
/****************************************/
|
||||
|
||||
/***** Tama Setting and Features *****/
|
||||
#define TAMA_DISPLAY_FRAMERATE 12
|
||||
#define TAMA_DISPLAY_FRAMERATE 12
|
||||
#define ENABLE_TAMA_SOUND
|
||||
#define ENABLE_REAL_TIME
|
||||
#define ENABLE_SAVE_STATUS
|
||||
#define AUTO_SAVE_MINUTES 10 // Auto save for every 10 minutes
|
||||
#define ENABLE_LOAD_STATE_FROM_EEPROM
|
||||
//#define ENABLE_DUMP_STATE_TO_SERIAL_WHEN_START
|
||||
// #define ENABLE_SERIAL_DUMP
|
||||
//#define ENABLE_SERIAL_DEBUG_INPUT
|
||||
//#define ENABLE_LOAD_HARCODED_STATE_WHEN_START
|
||||
/***************************/
|
||||
|
||||
/***** Time and clock *****/
|
||||
// ESP8266 is not a very good time keeping device, each one of these little shits has a different clock oscilator.
|
||||
// it also seems that the temperature also effects the clock frequency so time keeps on drifting and it get's noticable after some time.
|
||||
// You can play around with these 2 to try and reduce the drift:
|
||||
|
||||
#define EMULATOR_CLOCK_SPEED 1000000
|
||||
// If game time is going faster than it should, increase this value by 1 to slow it down.
|
||||
|
||||
// fixed microsecond sleep between each cycle used to fine tune the emulator time drift even more
|
||||
#define FINE_TUNING_DELAY 1
|
||||
// If game time is going faster than it should, increase this value
|
||||
/**************************************************************************/
|
||||
/***************************/
|
||||
|
||||
/***** Set display orientation, U8G2_MIRROR_VERTICAL is not supported *****/
|
||||
//#define U8G2_LAYOUT_NORMAL
|
||||
@ -59,7 +43,6 @@ U8G2_SSD1306_128X64_NONAME_2_HW_I2C display(U8G2_MIRROR);
|
||||
#define PIN_BTN_L 12 // D6
|
||||
#define PIN_BTN_M 13 // D7
|
||||
#define PIN_BTN_R 15 // D8
|
||||
//define PIN_BTN_SAVE 3
|
||||
#define PIN_BUZZER 0 // D5
|
||||
|
||||
/**** TamaLib Specific Variables ****/
|
||||
@ -81,11 +64,10 @@ static void hal_log(log_level_t level, char *buff, ...) {
|
||||
|
||||
static void hal_sleep_until(timestamp_t ts) {
|
||||
#ifdef ENABLE_REAL_TIME
|
||||
int32_t remaining = (int32_t) (ts - hal_get_timestamp());
|
||||
int32_t remaining = (int32_t)(ts - hal_get_timestamp());
|
||||
if (remaining > 0) {
|
||||
delayMicroseconds(remaining);
|
||||
}
|
||||
delayMicroseconds(FINE_TUNING_DELAY); // fixed delay to compensate for emulator time drifting
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -179,17 +161,15 @@ static int hal_handler(void) {
|
||||
#ifdef ENABLE_SAVE_STATUS
|
||||
if (digitalRead(PIN_BTN_L) == HIGH && digitalRead(PIN_BTN_M) == HIGH && digitalRead(PIN_BTN_R) == HIGH) {
|
||||
if (button4state==0) {
|
||||
|
||||
saveStateToEEPROM(&cpuState);
|
||||
|
||||
noTone(PIN_BUZZER);
|
||||
tone(PIN_BUZZER, 700,100);
|
||||
tone(PIN_BUZZER, 700, 100);
|
||||
delay(120);
|
||||
noTone(PIN_BUZZER);
|
||||
tone(PIN_BUZZER, 880,100);
|
||||
tone(PIN_BUZZER, 880, 100);
|
||||
delay(120);
|
||||
noTone(PIN_BUZZER);
|
||||
tone(PIN_BUZZER, 1175,100);
|
||||
tone(PIN_BUZZER, 1175, 100);
|
||||
delay(120);
|
||||
noTone(PIN_BUZZER);
|
||||
}
|
||||
@ -198,7 +178,6 @@ static int hal_handler(void) {
|
||||
button4state = 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
@ -216,32 +195,22 @@ static hal_t hal = {
|
||||
.handler = &hal_handler,
|
||||
};
|
||||
|
||||
/*
|
||||
void drawTriangle(uint8_t x, uint8_t y) {
|
||||
//display.drawLine(x,y,x+6,y);
|
||||
display.drawLine(x+1,y+1,x+5,y+1);
|
||||
display.drawLine(x+2,y+2,x+4,y+2);
|
||||
display.drawLine(x+3,y+3,x+3,y+3);
|
||||
}
|
||||
*/
|
||||
|
||||
void drawTamaRow(uint8_t tamaLCD_y, uint8_t ActualLCD_y, uint8_t thick) {
|
||||
uint8_t i;
|
||||
for (i = 0; i < LCD_WIDTH; i++) {
|
||||
uint8_t mask = 0b10000000;
|
||||
mask = mask >> (i % 8);
|
||||
if ( (matrix_buffer[tamaLCD_y][i/8] & mask) != 0) {
|
||||
display.drawBox(i+i+i+16,ActualLCD_y,2,thick);
|
||||
if ((matrix_buffer[tamaLCD_y][i/8] & mask) != 0) {
|
||||
display.drawBox(i+i+i+16, ActualLCD_y, 2, thick);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void drawTamaSelection(uint8_t y) {
|
||||
uint8_t i;
|
||||
for(i=0;i<8;i++) {
|
||||
for (i = 0; i < 8; i++) {
|
||||
if (icon_buffer[i]) {
|
||||
// drawTriangle(i*16+5,y);
|
||||
display.drawXBMP(i*16+4,y+6,8,8,bitmaps+i*8);
|
||||
display.drawXBMP(i * 16 + 4, y + 6, 8, 8, bitmaps + i * 8);
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -250,50 +219,50 @@ void displayTama() {
|
||||
uint8_t j;
|
||||
display.firstPage();
|
||||
#ifdef U8G2_LAYOUT_ROTATE_180
|
||||
drawTamaSelection(49);
|
||||
display.nextPage();
|
||||
drawTamaSelection(49);
|
||||
display.nextPage();
|
||||
|
||||
for (j = 11; j < LCD_HEIGHT; j++) {
|
||||
drawTamaRow(j,j+j+j,2);
|
||||
}
|
||||
display.nextPage();
|
||||
for (j = 11; j < LCD_HEIGHT; j++) {
|
||||
drawTamaRow(j, j + j + j, 2);
|
||||
}
|
||||
display.nextPage();
|
||||
|
||||
for (j = 5; j <= 10; j++) {
|
||||
if (j==5) {
|
||||
drawTamaRow(j,j+j+j+1,1);
|
||||
} else {
|
||||
drawTamaRow(j,j+j+j,2);
|
||||
}
|
||||
for (j = 5; j <= 10; j++) {
|
||||
if (j == 5) {
|
||||
drawTamaRow(j, j + j + j + 1, 1);
|
||||
} else {
|
||||
drawTamaRow(j, j + j + j, 2);
|
||||
}
|
||||
display.nextPage();
|
||||
}
|
||||
display.nextPage();
|
||||
|
||||
for (j = 0; j <= 5; j++) {
|
||||
if (j==5) {
|
||||
drawTamaRow(j,j+j+j,1);
|
||||
} else {
|
||||
drawTamaRow(j,j+j+j,2);
|
||||
}
|
||||
for (j = 0; j <= 5; j++) {
|
||||
if (j == 5) {
|
||||
drawTamaRow(j, j + j + j, 1);
|
||||
} else {
|
||||
drawTamaRow(j, j + j + j, 2);
|
||||
}
|
||||
display.nextPage();
|
||||
}
|
||||
display.nextPage();
|
||||
#else
|
||||
for (j = 0; j < LCD_HEIGHT; j++) {
|
||||
if (j!=5) drawTamaRow(j,j+j+j,2);
|
||||
if (j==5) {
|
||||
drawTamaRow(j,j+j+j,1);
|
||||
display.nextPage();
|
||||
drawTamaRow(j,j+j+j+1,1);
|
||||
}
|
||||
if (j==10) display.nextPage();
|
||||
for (j = 0; j < LCD_HEIGHT; j++) {
|
||||
if (j != 5) drawTamaRow(j, j + j + j, 2);
|
||||
if (j == 5) {
|
||||
drawTamaRow(j, j + j + j, 1);
|
||||
display.nextPage();
|
||||
drawTamaRow(j, j + j + j + 1, 1);
|
||||
}
|
||||
display.nextPage();
|
||||
drawTamaSelection(49);
|
||||
display.nextPage();
|
||||
if (j == 10) display.nextPage();
|
||||
}
|
||||
display.nextPage();
|
||||
drawTamaSelection(49);
|
||||
display.nextPage();
|
||||
#endif
|
||||
}
|
||||
|
||||
#if defined(ENABLE_DUMP_STATE_TO_SERIAL_WHEN_START) || defined(ENABLE_SERIAL_DUMP)
|
||||
void dumpStateToSerial() {
|
||||
uint16_t i, count=0;
|
||||
uint16_t i, count = 0;
|
||||
char tmp[10];
|
||||
cpu_get_state(&cpuState);
|
||||
u4_t *memTemp = cpuState.memory;
|
||||
@ -301,37 +270,28 @@ void dumpStateToSerial() {
|
||||
|
||||
Serial.println("");
|
||||
Serial.println("static const uint8_t hardcodedState[] PROGMEM = {");
|
||||
for(i=0;i<sizeof(cpu_state_t);i++,count++) {
|
||||
for (i = 0; i < sizeof(cpu_state_t); i++, count++) {
|
||||
sprintf(tmp, "0x%02X,", cpuS[i]);
|
||||
Serial.print(tmp);
|
||||
if ((count % 16)==15) Serial.println("");
|
||||
if ((count % 16) == 15) Serial.println("");
|
||||
}
|
||||
for (i = 0; i < MEMORY_SIZE; i++,count++) {
|
||||
sprintf(tmp, "0x%02X,",memTemp[i]);
|
||||
for (i = 0; i < MEMORY_SIZE; i++, count++) {
|
||||
sprintf(tmp, "0x%02X,", memTemp[i]);
|
||||
Serial.print(tmp);
|
||||
if ((count % 16)==15) Serial.println("");
|
||||
if ((count % 16) == 15) Serial.println("");
|
||||
}
|
||||
Serial.println("};");
|
||||
/*
|
||||
Serial.println("");
|
||||
Serial.println("static const uint8_t bitmaps[] PROGMEM = {");
|
||||
for(i=0;i<144;i++) {
|
||||
sprintf(tmp, "0x%02X,", bitmaps_raw[i]);
|
||||
Serial.print(tmp);
|
||||
if ((i % 18)==17) Serial.println("");
|
||||
}
|
||||
Serial.println("};"); */
|
||||
}
|
||||
#endif
|
||||
|
||||
uint8_t reverseBits(uint8_t num) {
|
||||
uint8_t reverse_num = 0;
|
||||
uint8_t i;
|
||||
for (i = 0; i < 8; i++) {
|
||||
if((num & (1 << i)))
|
||||
reverse_num |= 1 << ((8 - 1) - i);
|
||||
}
|
||||
return reverse_num;
|
||||
uint8_t reverse_num = 0;
|
||||
uint8_t i;
|
||||
for (i = 0; i < 8; i++) {
|
||||
if ((num & (1 << i)))
|
||||
reverse_num |= 1 << ((8 - 1) - i);
|
||||
}
|
||||
return reverse_num;
|
||||
}
|
||||
|
||||
void setup() {
|
||||
@ -339,7 +299,6 @@ void setup() {
|
||||
pinMode(PIN_BTN_L, INPUT);
|
||||
pinMode(PIN_BTN_M, INPUT);
|
||||
pinMode(PIN_BTN_R, INPUT);
|
||||
//pinMode(PIN_BTN_SAVE, INPUT);
|
||||
pinMode(PIN_BUZZER, OUTPUT);
|
||||
|
||||
display.setI2CAddress(DISPLAY_I2C_ADDRESS * 2); // required if display does not use default address of 0x3C
|
||||
@ -351,12 +310,11 @@ void setup() {
|
||||
tamalib_init(EMULATOR_CLOCK_SPEED);
|
||||
|
||||
#if defined(ENABLE_SAVE_STATUS) || defined(AUTO_SAVE_MINUTES) || defined(ENABLE_LOAD_STATE_FROM_EEPROM)
|
||||
initEEPROM();
|
||||
initEEPROM();
|
||||
#endif
|
||||
|
||||
#ifdef ENABLE_LOAD_STATE_FROM_EEPROM
|
||||
if (validEEPROM())
|
||||
{
|
||||
if (validEEPROM()) {
|
||||
loadStateFromEEPROM(&cpuState);
|
||||
} else {
|
||||
Serial.println(F("No magic number in state, skipping state restore"));
|
||||
@ -365,18 +323,11 @@ void setup() {
|
||||
loadHardcodedState(&cpuState);
|
||||
#endif
|
||||
|
||||
/*
|
||||
int i;
|
||||
for(i=0;i<(18*8);i++) {
|
||||
bitmaps_raw[i]= reverseBits(bitmaps_raw[i]);
|
||||
}
|
||||
*/
|
||||
|
||||
#ifdef ENABLE_DUMP_STATE_TO_SERIAL_WHEN_START
|
||||
dumpStateToSerial();
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
uint32_t middle_long_press_started = 0;
|
||||
uint32_t right_long_press_started = 0;
|
||||
bool is_display_off = false;
|
||||
@ -387,12 +338,12 @@ void loop() {
|
||||
|
||||
unsigned long currentMillis = millis();
|
||||
|
||||
#ifdef AUTO_SAVE_MINUTES
|
||||
#ifdef AUTO_SAVE_MINUTES
|
||||
if ((currentMillis - lastSaveTimestamp) > AUTO_SAVE_INTERVAL) {
|
||||
lastSaveTimestamp = currentMillis;
|
||||
saveStateToEEPROM(&cpuState);
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
bool middleLeftPressed = (digitalRead(PIN_BTN_M) == HIGH) && (digitalRead(PIN_BTN_L) == HIGH);
|
||||
bool rightPressed = (digitalRead(PIN_BTN_R) == HIGH);
|
||||
@ -400,9 +351,9 @@ void loop() {
|
||||
if (middleLeftPressed) {
|
||||
if ((currentMillis - middle_long_press_started) > 2000) {
|
||||
eraseStateFromEEPROM();
|
||||
#if defined(ESP8266) || defined(ESP32)
|
||||
#if defined(ESP8266) || defined(ESP32)
|
||||
ESP.restart();
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
} else {
|
||||
middle_long_press_started = currentMillis;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user